Brother GTX pro Snelle gebruikershandleiding - Pagina 13
Blader online of download pdf Snelle gebruikershandleiding voor {categorie_naam} Brother GTX pro. Brother GTX pro 15 pagina's. Garment printer
Ook voor Brother GTX pro: Referentiehandleiding (13 pagina's), Gebruikershandleiding (16 pagina's), Installatiehandleiding (40 pagina's)
Pagina afdrukken
When Not Using Printer for a Long Period of Time
> When the printer will not be used for a prolonged period of time, follow appropriate procedures before
storing the printer according to the expected storage period and storage conditions. When in doubt, create
a ticket at
BrotherDTG.com/Support
WARNING:
Every 2 Weeks of Inactivity Checklist
The printer can be restored to operational status after the storage
period by performing the following maintenance tasks before storage:
• Please empty the Waste ink Tank.
• Check the amount of Cleaning Solution in the cleaning liquid
tank and refill the tank if its amount is below the proper level.
• Shake the white ink if the white ink cartridge agitation message
is displayed on the operation panel screen.
• Thoroughly clean the Nozzle Guards, Wipers, Suction Caps and
Exhaust Caps.
• Print out a Nozzle Check pattern for White and CMYK.
• If a non-firing nozzle is found: Perform Head Cleanings, run the
Nozzle Check prints and verify the result again. Continue same
process until the blocked nozzles are ALL OPEN again.
CMYK & White Inks, Cleaning Solution, Maintenance Solution & Pretreatment
Solution should be stored at a temperature range between a minimum of
32°F and a maximum of 104°F.
> Be carefull NOT to go below 32°F.
> Please ROTATE the White ink pouch boxes every week.
HOW TO EXTRACT A LOG FILE FROM THE PRINTER
Insert a USB stick in the front slot of the printer to be able to copy the log file and follow these steps:
Maintenance
Menu
for support.
DO NOT turn the printer OFF, otherwise, the printer may become DAMAGED.
INK & SOLUTIONS STORAGE
Log copy to USB
13