Brother GTX pro Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Brother GTX pro. Brother GTX pro 16 pagina's. Garment printer
Ook voor Brother GTX pro: Referentiehandleiding (13 pagina's), Snelle gebruikershandleiding (15 pagina's), Installatiehandleiding (40 pagina's)
2
Pre-treat application to garment Dark & Light
Dark 30 Grams 1:1
Medium 24-27 Grams 1:1
Light 14-17 Grams 1:1
This mixing ratio might vary due to the type of garment which is used. Use your
experience!
Don't forget that you have to define a surface of 14 X 16 inches [35 X 40 cm] with
your Pre-Treatment machine to weigh the amount of spray, with a scale, after
applying the Pre-Treatment liquid on a T-shirt!
Heat Press Settings for Pre-Treatment Drying
45seconds @ 170c
Use
Teflon
Teflon
surface every 5 T-shirts min or purchase a heat press
and save you time placing Teflon sheet on product.
Heat Press Settings for Ink Curing
Heat Press 45seconds @ 170c
Use Teflon Sheet on the heat press to cover the Pre-treatment and clean the
Teflon surface every 5 T-shirts min or purchase a heat press Teflon top cover
and save you time placing Teflon sheet on product.
Tunnel Dryer 3.30 minutes @ 160c
Check the REAL Temperature with a Probe or with Strips to be sure that you are
safe for the wash ability!
Never Turn the Power Off
The Brother GTX
NEVER
only!
Power
day
Sheet on the heat press to cover the Pre-treatment and clean the
pro should
shut
OFF
the printer except if requested by the display message
is requested to perform the needed recirculation of the inks every
ALWAYS
be left with Power ON
Teflon
top cover