AEG 40809 Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AEG 40809. AEG 40809 40 pagina's.

User's instructions

All packing devices must be removed from the washing machine before

you use it. Severe damage may occur to the washing machine or adjacent

furniture if you forget to remove any of the transport protection

packing. Always unplug the washing machine before removing packing.

All repairs to the washing machine must be made by qualified personnel.

Safety devices

Cover: your washing machine is equipped with a safety device preventing

the washing machine cover from closing when the drum doors are open.

It is impossible to start it until the doors are closed. An electromechanical

safety device prevents you from opening the cover while the washing

machine is operating, and for about 2 minutes after the end of the

program.

Washing motor: a temperature safety device protects the motor against

risks of mechanical overload, or overvoltage or undervoltage.

Heating: heating will not start until the water quantity necessary for

washing has been added into the tank. This safety device is effective

mainly when the water supply is cut off or if you forget to open the water

supply tap.

The anti-foam system: water consumption is very low, due to the

electronic spin cycle with an intermediate spin after the main wash and

three rinse cycles for white and color programs. The spin cycle remains

under the control of the foam detection system after the wash cycle has

finished. If necessary, the spin cycle will stop until all foam is removed.

The unbalanced weight protection system: this safety system keeps the

washing machine stable during intermediate spins or the final spin and

therefore detects any bad distribution of your washing (small load or

tangled washing). It can then remedy this situation.