AEG 61300 Instructieboek - Pagina 45

Blader online of download pdf Instructieboek voor {categorie_naam} AEG 61300. AEG 61300 48 pagina's. Washing machine
Ook voor AEG 61300: Instructieboek (48 pagina's)

Pagina afdrukken

Water Drainage

The appliance drain hose should hook into a standpipe, the hook in the

drain hose is formed using the plastic U-Piece supplied. The standpipe

should have an internal diameter of approximately 38 mm (see dia-

gram) thus ensuring there is an air break between the drain hose and

standpipe.

When discharging into a stand-

pipe ensure that the top of the

curve in the hose end is no more

than 90 cm (35.4) and no less

than 60 cm (23.6) above floor

level.

The upright standpipe should

have a minimum, length of

30 cm (12) from the bottom of

the elbow to the top of the pipe

(see diagram). Make sure that it

is designed in such a way that

the end of the drain hose can-

not be covered with water.

Longer drain hoses are availa-

ble in lengths of 2.7 and 4

metres from your AEG Service

Force Centre.

If you intend the drain hose

from the washing machine to

empty into a sink, make sure

that the sink is empty and the

plug hose is not blocked. Use

the plastic U-Piece supplied.

Installation and Connection Instructions

38mm (1

diameter standpipe

)