DO NOT wind the AC adapter or Car adapter cable around the adapter or bend the cable, otherwise
the cable may be damaged.
DO NOT overload electric outlets or plug multiple devices into the same electric outlet. There is a
risk of fire, electric shock, and damage.
DO NOT use damaged plugs or bent electric outlets. There is a risk of fire, electric shock, and
damage.
Printer
Keep out of the reach of children, particularly infants, otherwise injury may result.
Stop operating the printer if it leaks or becomes discolored, deformed, or otherwise defective.
DO NOT hold the printer by the RD Roll compartment cover. There is a risk of injury if the cover
detaches and the printer falls.
When connecting cables and accessories, make sure they're connected correctly and in the correct
order. Only connect items that are designed specifically for this printer. There is a risk of fire or
injury. Refer to the instructions when connecting.
DO NOT directly touch the printer continuously for prolonged periods while the power is turned on.
Touching hot components directly for prolonged periods may cause low temperature burns.
Tear bar
DO NOT touch the tear bar directly, otherwise injury may result.
AC adapter/Car adapter (Optional)
Make sure that the AC adapter's power cord or the Car adapter is accessible so that it can be
removed in an emergency. DO NOT place objects on or near the AC adapter's power cord or the
Car adapter's cord.
Belt clip
Make sure that the screw is tightened securely. There is a risk of injury if the screw is loose and the
printer falls.
Make sure that the belt clip is attached securely to the printer. There is a risk of injury if the belt clip
is not attached securely and the printer falls.
Make sure that the belt clip is attached securely to the wearer's belt. There is a risk of injury if the
belt clip is not attached securely and the printer falls.
RD Roll
Be careful not to drop the RD Roll.
The RD Roll uses thermal paper, therefore the color of the label and the printing may change or
fade if exposed to sunlight or heat. When using outdoors and when durability is important, we DO
NOT recommend using the RD Roll.
Depending on the area, material, and environmental conditions, the label may unpeel or become
permanently affixed, and the color of the label may change or be transferred to other objects. Before
affixing the label, check the environmental conditions and the material. Test the label by affixing a
small piece of it to an inconspicuous area of the intended surface.
WARNING
CAUTION
9
Pagina afdrukken