AEG 7000 Series Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG 7000 Series. AEG 7000 Series 49 pagina's.
Ook voor AEG 7000 Series: Gebruikershandleiding (32 pagina's), Gebruikershandleiding (44 pagina's), Gebruikershandleiding (32 pagina's), Gebruikershandleiding (28 pagina's), Gebruikershandleiding (36 pagina's)
Pagina afdrukken
Control panel
3
Magnetic plate
4
Door handle
5
Rating plate
6
Plate with rubber beater
7
Drain pump filter
8
A
B
Mod. xxxxxxxxx
Prod.No.
C
000V ~ 00Hz 0000 W
D
4. TECHNICAL DATA
Dimension
Electrical connection
Level of protection against ingress of solid particles and
moisture ensured by the protective cover, except where
the low voltage equipment has no protection against
moisture
Water supply pressure
1)
Water supply
Maximum Load
Spin Speed
1) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot
connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your
domestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of the water storage tank.
2) Connect the water inlet hose to a water tap with a 3/4'' thread.
5. INSTALLATION
WARNING!
Refer to Safety chapters.
910000000 00
00A
00000000
Width/ Height/ Total depth
Voltage
Overall power
Fuse
Frequency
Minimum
Maximum
2)
Cotton
Maximum spin speed
Front feet for levelling the appliance
9
Drain hose
10
Mains cable
11
Inlet hose connection
12
Back feet for levelling the appliance
13
The rating plate reports the model name
(A), product number (B), electrical ratings (C)
and serial number (D).
59.6 cm /81.9 cm /55.3 cm
230-240 V
2000 W
13 A
50 Hz
IPX4
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
Cold water
8 kg
1351 rpm
5.1 Be prepared for installation
It is recommended that
installation is carried out by
two persons.
ENGLISH
7