Fujitsu FI-6750S Aan de slag handleiding - Pagina 3

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Fujitsu FI-6750S. Fujitsu FI-6750S 26 pagina's. Image scanner
Ook voor Fujitsu FI-6750S: Gebruikershandleiding (26 pagina's), Aan de slag handleiding (14 pagina's)

Pagina afdrukken

Regulatory Information

FCC Declaration

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installa-

tion. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to

radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is located.

• Consult your dealer or an experienced radio/TV technician.

FCC warning: Changes or modifications not expressly

approved by the party responsible for compliance could void

the user's authority to operate the equipment.

The use of a shielded interface cable is required to

comply with the Class B limits of Part 15 of FCC

rules.

The length of the Power cable must be 3 meters

(10 feet) or less.

Canadian DOC Regulations

This digital apparatus does not exceed the Class B limit for

radio noise emissions from digital apparatus set out in the

Radio interference Regulations of the Canadian Department of

Communications.

This Class B digital apparatus complies with Canadian ICES-

003.

Le présent appareil numérique n'émet pas de parasites

radioélectriques dépassant les limites applicables aux appar-

eils numériques de la classe B et prescrites dans le Règle-

ment sur le brouillage radioélectrique dictées par le Ministère

des Communications du Canada.

Cet appareil numérique de la classe B est conforme à la

norme NMB-003 du Canada.

Bescheimigung des Herstellers/

Importeurs

Für den fi-6670/fi-6770/fi-6750S wird folgendes bescheinigt:

• In Übereinsstimmung mit den Bestimmungen der

EN45014(CE) funkentstört

• Maschinenlärminformationsverordnung 3. GPSGV: Der

höchste Schalldruckpegel beträgt 70 dB (A) oder weniger,

gemäß EN ISO 7779.

Dieses Gerät wurde nicht für die Benutzung in unmittelbarer

Umgebung starker Lichtquellen (z. B. Projektoren) konzipiert.

ENERGY STAR

PFU LIMITED, a Fujitsu company, has deter-

mined that this product meets the ENERGY

STAR

guidelines for energy efficiency.

ENERGY STAR

is a registered trademark

of the United States.

Use in High-Safety Applications

This product has been designed and manufactured on the

assumption that it will be used in office, personal, domestic,

regular industrial, and general-purpose applications.

It has not been designed and manufactured for use in applica-

tions (simply called "high-safety applications" from here on)

that directly involve danger to life and health when a high

degree of safety is required, for example, in the control of

nuclear reactions at nuclear power facilities, automatic flight

control of aircraft, air traffic control, operation control in mass-

transport systems, medical equipment for

sustaining life, and missile firing control in weapons systems,

and when provisionally the safety in question is not ensured.

The user should use this product with adopting measures for

ensuring safety in such high-safety applications. PFU LIMITED

assumes no liability whatsoever for damages arising from use

of this product by the user in high-safety applications, and for

any claims or compensation for damages by the user or a third

party.

Conventions

Symbols Used In This Manual

For notational conventions, the following symbols are used in

this manual.

This symbol alerts operators to particularly impor-

tant information. Be sure to read this information.

This symbol alerts operators to helpful advice

regarding operation.

Naming Conventions in This Manual

■ Scanners

The scanners are indicated as follows:

Model

fi-6670

fi-6770/fi-6750S

The explanation in this manual bases on the following

models:

•ADF type: fi-6670

•Flatbed type: fi-6770

Indication

ADF type

Scanner

Flatbed type