AEG 8000 OKOMIX Gebruikershandleiding - Pagina 38

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG 8000 OKOMIX. AEG 8000 OKOMIX 48 pagina's.

www.aeg.com

•

- No communication between electronic elements of the appliance. Switch it

off and switch on again. The programme was not finished properly or the appliance

stopped too early. If the alarm code appears again, contact the Authorised Service

Centre.

•

- The anti-flood device is on. Disconnect the appliance and close the water

tap. Contact the Authorised Service Centre.

•

- The appliance does not fill with water properly. After the proper check, start

the appliance again by pressing Start/Pause button the appliance tries to resume

the cycle . If the error persists the alarm code will appear again.

•

- The appliance does not drain the water.

•

- The appliance door is open or not closed correctly. Please check the door!

If the appliance is overloaded, remove some items from the drum

and/or hold the door shut while touching the Start/Pause button until

the indicator

13.2 Possible failures

Problem

The programme does

not start.

stops flashing (see the picture below).

Possible solution

• Make sure that the mains plug is connected to the mains

socket.

• Make sure that the appliance door is closed.

• Make sure that there is no damaged fuse in the fuse box.

• Make sure that the Start/Pause has been touched.

• If the delay start is set, cancel the setting or wait for the end

of countdown.

• Deactivate the Child Lock function if it is on.

• Check the position of the knob on the selected pro-

gramme.