Fujitsu LIFBOOK U747 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Fujitsu LIFBOOK U747. Fujitsu LIFBOOK U747 46 pagina's.

The Load Number assigned to each telephone

terminal device denotes the percentage of the

total load to be connected to a telephone loop

or circuit which is used by the device to prevent

overloading. The termination on a loop may

consist of any combination of devices such that

the total of the load numbers of all devices does ot

exceed 100.

For safety, users should ensure that the

electrical ground of the power utility, the

telephone lines and the metallic water

pipes are connected together.

Users should NOT attempt to make such

connections themselves but should contact

the appropriate electric inspection authority

or electrician. This may be particularly

important in rural areas.

UL Notice

This unit requires an AC adapter to operate. Use

only UL Listed adapter, output rating 19VDC,

3.42A/4.22*. Refer to the illustration below for the

correct AC Adapter output polarity:

* Please check with local distributor for actual

bundling.

To reduce the risk of fire, use only #26

AWG or larger telecommunications line

cord.

For Authorized Repair Technicians Only

For continued protection against risk of fire,

replace only with the same type and rating

fuse.

Danger of ecplosion if Lithium (CMOS)

battery is incorrectly replaced. Replace

only with the same or equivalent type

recommended by the manufacturer.

Dispose of used batteries according to the

manufacturer's instruction.

Proper Disposal of Battery

Under federal, state or local law, it may be illegal

to dispose of batteries by putting them in the

rubbish bins or trash cans. Please take care of

our environment and dispose of batteries properly

for details regarding recycling or disposing of

unwanted batteries.

Operation Temperature: 35°C

vii