AEG AWF8024M3SB Gebruikershandleiding - Pagina 16
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG AWF8024M3SB. AEG AWF8024M3SB 40 pagina's.
Pagina afdrukken
16
www.aeg.com
3.6 Start/Pause (
Add Clothes (
This touchpad has 2 functions:
1.
Start/Pause (
After you have selected the desired
program and options, press this
touchpad to start the machine. The
Start/Pause pilot light will stop flashing
and remain lit until the water level is
above the bottom edge of the door
then pilot light goes OFF. If you have
selected a "Delay End" option, the
countdown will begin and will be
shown on the display.
To interrupt a program which is
running, press this touchpad to pause
the machine, the Start/Pause pilot light
flashes.
To restart the program from the point
at which it was interrupted, press this
touchpad again, the Start/Pause pilot
light will stop flashing.
4.
BEFORE FIRST USE
NOTE
During installation or before first use
you may observe some water in the
machine. This is a residual water left in
the machine after a full functional test
in the factory to ensure the machine is
delivered to customers in perfect
working order and is no cause for
concern.
Ensure that the electrical and water
1.
connections comply with the
installation instructions.
Put 2 litres of water in the detergent
2.
compartment for washing phase. This
activates the drain system.
) and
) Touchpad
)
2.
Add Clothes (
You can only add clothes when
the icon "
display.
To add clothes:
1.
Pressing the "Start/Pause"
touchpad to pause the program.
2.
Wait for the machine to come to a
complete stop before opening the
door (wait for door lock "
to turn off).
3.
Add clothing and close the door.
4.
Resume the program by pressing
"Start/Pause" touchpad again.
3. Select a Cottons cycle at 90 °C,
without any laundry in the machine, to
remove any manufacturing residue
from the drum and tub then start the
machine.
)
" shown on the
" icon