Brother P-Touch Home & Hobby PT-65 Gebruiksaanwijzing - Pagina 2
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Brother P-Touch Home & Hobby PT-65. Brother P-Touch Home & Hobby PT-65 2 pagina's. Labeler with lcd screen
Ook voor Brother P-Touch Home & Hobby PT-65: Gebruiksaanwijzing (4 pagina's)
Pagina afdrukken
Function keys
Tape cutter button
Backspace key
Print key
LCD display
On/Off key
Code key
Space key
Code key
Caps key
Num key
Switching the language of the messages
To display the current language setting ( ENGLISH or FRANÇAIS ),
turn off the P-touch, and then, while holding down
and
turn the P-touch on, and keep
and
held down. To change
the language setting, while still holding down
and
until the desired setting appears in the display, and then release
the keys.
The default setting is English.
Turning off the machine does not change the language setting.
• On/Off (
)
To switch the P-Touch on or off, press
.
The P-Touch conserves battery power by automatically switch-
ing itself off if no key is pressed within five minutes. When the
batteries are low, "BATTERY" appears on the display after print-
ing. When the batteries are very low, the P-Touch will automati-
cally turn itself off when you try to print text or feed the tape.
If the P-Touch is turned off and then on again, the current text,
text size and style, underline/frame setting, and Caps setting
remain unchanged.
• Caps (
)
To turn the Caps function on or off, press
. When the Caps
indicator is on, you can add capital letters to your text by sim-
ply pressing the character keys. When the Caps indicator is
off, pressing a character key enters a small letter in your text.
• Num (
)
To turn the Num function on or off, press
. When the Num
indicator is on, you can add numbers to your text by simply
pressing the corresponding keys. When the Num indicator is
off, pressing a key adds a letter to the text.
• Space (
)
To add a space to your text, press
.
• Return (
)
To select a setting, such as an accented character or a symbol,
or an automatically formatted layout, press
.
To end the first line of text and start the second, press
to position the cursor under the character that will start
the second line. Press
. A marker ( ) appears to the left of
the character above the cursor. Two-line text can only be printed
with the SIZE1 text size and the NORMAL style. To change a
message back to a single line, use
to delete the marker.
• Code (
/
)
To access the functions or enter the characters printed in yellow
above the keys, press
. See the following explanations and
"Advanced functions" for more details on how this key is used.
The left and right Code keys can be used in the same way.
• Cursor movement (
You can move the cursor ( _ ) to view or edit parts of the text
to the left or right of the 8 characters shown in the LCD dis-
play. To move the cursor to the left, press
cursor to the right, press
. Move the cursor several char-
acters in a row by holding down the appropriate key.
To position the cursor under the first character of the text, hold
down
and press
; to position the cursor immedi-
ately after the last character, hold down
• Backspace (
)
To delete the character to the left of the cursor, press
key can also be used to quit any function and return to the
current text.
To erase the current text, hold down
text size, style, underline/frame setting, and Caps/Num set-
ting are not cleared.
• Text (
)
To view the entered text, hold down
the entered text, starting from the beginning, scrolls along the
,
display, then the length of the text appears .
To change the units, press
while the text is scrolling across
, press
the display. Press
or
(or press
unit appears, and then press
. The current label length
appears in the display for a short time.
• Feed (
)
To feed out about 1" (24 mm) of tape at a time, hold down
and press
. The message "FEED" appears while the
tape is fed.
Do not press the tape cutter button while feeding, as this will
cause the tape to jam.
• Print (
)
To print out the entered text, press
"PRINT" appears while printing.
Do not press the tape cutter button while printing, as this
will cause the tape to jam.
• Accented characters (
To enter an accented character, first make sure the Caps func-
tion is turned on or off as desired, then hold down
press
. After the message "A–U?" appears, press the key of
the desired letter (A, C, E, I, N, O or U).
In the displayed list of available accented characters, press
or
to position the cursor under the desired
accented character, then press
. Your text reappears on the
display with the selected character added.
To clear the list of available accented characters and return to
the current text, press
(or hold down
instead of pressing
.
The following accented characters are available:
Accented characters
Accented characters
àáäâãæ
A
N
ÀÁÄÂÃÆ
C
ç Ç
O
or
E
èéëê ÈÉËÊ
U
I
í ï î Í Ï Î
,
)
Advanced functions
• Changing text size (
; to move the
To select a text size, hold down
The name of the currently selected size is displayed and is
shown by the indicator at the top of the display. Keep
held down and continue pressing
size appears and is indicated at the top of the display. The
and press
.
selected text size applies to the entire text.
The following five text sizes are available
SIZE1
SIZE2
. This
• Changing text style (
and press
. The
To select a text style, hold down
The name of the currently selected style is displayed. Keep
held down and continue pressing
text style appears. The selected text style applies to the entire
and press
. All of
text.
The following nine text styles are available:
NORMAL
) until the desired
SHADOW
I+BOLD (italic+bold)
• Add underlining (
To select underlining, hold down
The name of the currently selected setting is displayed. Keep
held down and continue pressing
. The message
setting appears and is shown by the Underline indicator. The
underline is printed under all of the text, but is not printed
when the VERTICAL style is selected. If a frame was chosen
before selecting underlining, the frame is cancelled and the
)
underline is printed.
The following underline settings are available:
TEXT (no underline)
and
• Add framing (
To select a frame, hold down
The name of the currently selected setting is displayed. Keep
held down and continue pressing
setting appears and is shown by the Frame indicator. The
and press
)
frame is printed around the entire text, but is not printed
when the VERTICAL style is selected. If underlining was cho-
sen before selecting a frame, the underline is cancelled and the
frame is printed.
ñ Ñ
óöôõ
ÓÖÔÕ
ùúüû ÙÚÜÛ
The following frame settings are available
TEXT
(no frame)
+ )
and press
.
CANDY
until your desired text
• Add a symbol (
:
To enter a symbol, press
appears, press the letter key of the group containing the
SIZE3
SIZE4
SIZE5
desired symbol. In the displayed list of available symbols,
press
desired symbol, then press
+ )
display with the selected symbol added.
and press
.
To clear the list of available symbols and return to the current
text, press
until your desired
The following symbols are available:
A
OUTLINE
BOLD
B
C
D
ITALIC
I+OUTL (italic+outline)
E
F
I+SHADOW (italic+shadow)
VERTICAL
G
H
+
)
I
and press
.
• Repeat printing (
until your desired
To print multiple copies of the current text with its formats,
hold down
appears, press the key corresponding to the desired number
of labels that you want to print. Press
fied number of labels.
• Using automatically formatted lay-
UNDL (underline)
outs (
To select an auto format, hold down
the message "1–9?" appears, press the number key of the
+
)
desired preset format. After the format name appears, press
and press
.
to view each of the format settings (text size, style and
underline/frame). Press
until your desired
then enter the text. The label will be printed with the format
settings of the selected auto format.
The following automatically formatted layouts are available:
PRESET 1
PRESET 6
:
ROUND
WOODEN
POINTING
DOT
DIAMOND
SLANT
)
. After the message "A–I?"
or
to position the cursor under the
. Your text reappears on the
(or
) instead of pressing
.
Symbols
Ü
ü
Ç
ç
Æ
æ
¡
¿
Ã
ã
Õ
õ
Ñ
ñ
á
é
í
ó
ú
#
+
=
§
%
;
˚
÷
™
®
©
2
3
2
3
4
[
]
_
˜
+ )
and press
. After the message "1-9?"
to print the speci-
+ )
and press
. After
to select the displayed format,
PRESET 2
PRESET 3
PRESET 4
PRESET 5
PRESET 7
PRESET 8
PRESET 9