Brother P-TOUCH P750W Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Brother P-TOUCH P750W. Brother P-TOUCH P750W 4 pagina's.

Pagina afdrukken
Brother P-TOUCH P750W Gebruikershandleiding
P750W
Brother support website
support.brother.com/g/d/d5p4/
Please visit our Support website.
You can find following information:
• Software download
• Manuals/Documents
• Frequently Asked Questions (Troubleshooting, Useful tips on using printer)
• Consumable information and the latest OS compatibility information.
You can also see setup steps on the website.
Click the "Getting ready to use your printer." link in the "information" section.
1
Unpacking the P750W and Parts
Description
Check that the package contains the following before using the P-touch. If any item is
missing or damaged, contact your Brother reseller.
• P750W
• AC adapter (AD-E001)
• Rechargeable Li-ion Battery
(BA-E001)
1
2
6
7
3
8
4
9
10
5
11
13
14
12
1
Top panel
8
Feed & Cut button
2
Editor Lite lamp
9
Status lamp
3
Editor Lite button
10 Battery lamp
4
Wireless mode button
11 Power button
5
Tape exit slot
12 Battery cover
6
Wi-Fi lamp
13 Mini-USB port
7
NFC lamp
14 AC adapter connector
2
Setting the Tape Cassette
CAUTION
If you cannot close the cassette cover, check to ensure the white lever is in the
up position. If not, lift the lever, and then attach the cover.
NOTE
• Make sure that there is no slack in the tape.
• When setting or removing the tape cassette, make sure that the tape does not
catch on the protrusion (1) or the print head.
English
Printed in China
LAF356001
• USB cable
• Starter tape cassette
20
16
15
18
15 Cassette cover
16 NFC tag
17 Release lever
18 Print head
19 Tape cutter
20 Cutter blade
1
User's Guide
Read this guide before you start using your P-touch.
Keep this guide in a handy place for future reference.
3

Connecting the Power Supply

Using the AC adapter

Using the batteries

17
19
To remove the batteries, reverse the installation procedure.
CAUTION
• Remove the batteries if you do not intend to use the P-touch labelling system
for an extended period of time.
• Dispose of the battery at an appropriate collection point, not in the general
waste stream. In addition, be sure to observe all applicable federal, state, and
local regulations.
• When storing or discarding the battery, wrap it (for
example with cellophane tape), to prevent it from
short-circuiting.
(Battery insulation example)
1. Cellophane tape
2. Alkaline or Ni-MH battery
4
Turning the P-touch On or Off
On: Press the Power button.
Off: Press and hold the Power button until the Status lamp is lit in orange.
NOTE
When turning the P-touch off, keep the AC adapter connected or the batteries
installed until the Status lamp goes off.
The contents of this website are
subject to change without notice.
AD-E001
LR6 or HR6
2
1