Brother P-Touch PT-E550WNIVP Handleiding voor snelle installatie - Pagina 38

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother P-Touch PT-E550WNIVP. Brother P-Touch PT-E550WNIVP 49 pagina's.

Pagina afdrukken

EDITING A LABEL

PUNCH-DOWN BLOCK

Labels printed with this mode can be used to identify a type of electrical connection often

used in telephony. There are up to three lines for each block on a single label and you can

enter three lines for each block. In this mode, you can specify the following items.

• Module Width: 8.0" (200 mm), 2.0" (50 mm) - 12.0" (300 mm)

• Block Type: 4 Pairs, 2 Pairs, 3 Pairs, 5 Pairs, Blank

• Sequence Type:

• Start Value: ---, 1 - 99999

• When "Blank" is selected in "Block Type", "Sequence Type" is set to None.

• When None is selected in "Sequence Type", "Start Value" shows "---" and you cannot set

a value. Selecting Horizontal or Backbone however, allows you to set the "Start Value"

from 1 to 99999.

Heat Shrink Tube

When using Heat Shrink Tube, the HEAT-SHRINK TUBE setting screen

will be displayed when any of the labeling application type keys is

pressed.

• Label length: Auto, 1.0" (25 mm) - 39.0" (999 mm)

However, the maximum printing length is 19.6" (500 mm) when using Heat Shrink Tube

with a width of 0.23" (5.8 mm) or 0.34" (8.8 mm).

Text: Type in single or multiple lines of data

When using Heat Shrink Tube:

• You cannot print frames.

• Portions of some decorative characters may be cut off when a line is broken.

• The printed characters may be smaller than when using TZe tape.

Selecting a Labeling Application Type

(None),

(Horizontal),

(Backbone)