AEG L 75470 FL Gebruikershandleiding - Pagina 17
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG L 75470 FL. AEG L 75470 FL 36 pagina's.
Ook voor AEG L 75470 FL: Gebruikershandleiding (36 pagina's), Gebruikershandleiding (36 pagina's), Gebruikershandleiding (32 pagina's), Gebruikershandleiding (36 pagina's)
Pagina afdrukken
CHANGE A FUNCTION
You can change only some functions
before they operate.
1. Press button
flashes.
2. Change the function set.
SET THE DELAY START
1. Press button
until the display shows the number
of minutes or hours. The related
symbols comes on.
2. Press button
starts the countdown of the delay
start.
When the countdown is comple-
ted, the programme starts auto-
matically.
Before you press button
start the appliance, you can can-
cel or change the set of the de-
lay start.
You cannot set the delay start
with the Steam programme.
CANCEL THE DELAY START
1. Press button
cator flashes.
AT THE END OF THE PROGRAMME
• The appliance stops automatically.
• The acoustic signals operate.
• In the display
• The indicator of the Start/Pause but-
ton
4
• The door lock symbol goes off.
• Press button
pliance. After five minutes from the
end of the programme, the energy
saving function automatically deacti-
vates the appliance.
When you activate the appli-
ance again, the display show the
end of the last set programme.
Turn the programme knob to
set a new cycle.
4
. The indicator
5
again and again
, the appliance
4
. The related indi-
4
comes on.
goes off.
1
to deactivate the ap-
2. Press button
until the display shows 0'.
3. Press button
starts.
OPEN THE DOOR
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1. Press button
symbol in the display goes off.
2. Open the appliance door.
3. Close the appliance door and press
button
delay start continues.
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the
4
to
door. To open the door do the
steps that follow:
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is
If you deactivate the appliance,
it is necessary to set the pro-
gramme again.
• Remove the laundry from the appli-
ance. Make sure that the drum is
empty.
• Keep the door ajar, to prevent mil-
dew and odours.
• Close the water tap.
The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent
the creases in the laundry.
– The door stays locked.
– You must drain the water to open the
door.
ENGLISH
5
again and again
4
. The programme
. The door lock
4
4
. The programme or the
in the drum.
17