Fujitsu LifeBook P1120 Bios Handleiding - Pagina 4

Blader online of download pdf Bios Handleiding voor {categorie_naam} Fujitsu LifeBook P1120. Fujitsu LifeBook P1120 26 pagina's. Lifebook p series

Pagina afdrukken

L i f e B o o k P S e r i e s N o t e b o o k B I O S

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies which ATA

devices are installed.

Main

Type:

Maximum Capacity:

Multi-Sector Transfers:

LBA Mode Control:

PIO Transfer Mode:

DMA Transfer Mode:

Help

ESC

Exit

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Options

Field

Type:

• Auto

• None

• CD-ROM

• Hard Disk

Cylinders:

• A number between

0 and 65,535

Heads:

• A number between 1

and 16

Sectors:

• A number between

0 and 63

PhoenixBIOS Setup Utility

Advanced

Security

Primary Master [FUJITSU MK3018GAP-(PM)]

[Auto]

30006MB

[16 Sectors]

[Enabled]

[Fast PIO 4]

[Ultra DMA 4]

Select Item

-/Space

Select Menu

Enter

Figure 2. Primary Master Submenu

Default

[Auto]

–—

Note: Actual hard drive label shown may vary. Depending

on the drive type, information such as cylinders, heads and

sectors may also be displayed.

Power

Boot

Info

Select ATA/ATAPI drive

installed here.

[Auto]

The BIOS auto-types the

drive on boot time.

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

Change Values

Select

Sub-Menu

Description

(Note: There is no drop-down menu available for the Type field. To change

the options, use the plus "+" and minus "-" keys or the spacebar.)

Selects the ATA/ATAPI device type. Select Auto to have the type automati-

cally identified by the BIOS at POST. If None is selected, all of the following

Set-up items do not appear. If Hard Disk is selected, you must specify the

number of Cylinders, Heads, and Sectors for the drive.

This item appears only when the type is identified as Hard Disk. When Hard

Disk is selected, you can change the value. This field is changed by incre-

menting (pressing the [Spacebar]) or by typing in the number.

This item appears only when the type is identified as Hard Disk. When Hard

Disk is selected, you can change the value. This field is changed by incre-

menting (pressing the [Spacebar]) or by typing in the number.

This item appears only when the type is identified as Hard Disk. When Hard

Disk is selected, you can change the value. This field is changed by incre-

menting (pressing the [Spacebar]) or by typing in the number.

Exit

Item Specific Help

Setup Defaults

F10

Save and Exit