Brother P-touch PT-P900 Handleiding productveiligheid - Pagina 10

Blader online of download pdf Handleiding productveiligheid voor {categorie_naam} Brother P-touch PT-P900. Brother P-touch PT-P900 15 pagina's. Electronic

P-touch Label Printer
When power is disconnected for more than two minutes, all text and format settings will be cleared. Any
text files stored in the memory will also be cleared.
A protective clear plastic sticker is placed over the display during manufacturing and shipping. Remove
this sticker prior to use.
The length of the printed label may differ from the displayed label length.
You can also use Heat Shrink Tube in this model.
Check the Brother website (www.brother.com) for further information. You cannot print frames or
pre-set P-touch Label Printer templates, or use certain font settings when using Heat Shrink Tube.
Printed characters may also be smaller than when using TZe tape or FLe tape.
The printed label may differ from the image that appears on the LCD (Optional:TDU).
Note that Brother Industries, Ltd. does not assume responsibility for any damage or injury arising from
the failure to follow the precautions listed in this guide.
We strongly recommend reading this guide carefully before using your P-touch Label Printer, and then
keeping it nearby for future reference.
Warning label
The following warning labels appear on the P-touch Label Printer. Fully understand the contents of
each warning label and perform operations while observing the precautions that are described. In
addition, be very careful that the warning labels do not peel off and are not scratched.
ATTENTION: (For USA)
The Lithium Ion battery you have purchased is recyclable. At the end of its useful life, under
various state and local laws, it is illegal to dispose of this battery into your municipal waste
stream. Please call 1-800-8-BATTERY for information on how to recycle this battery.
General Precautions
9