Fujitsu LifeBook P5010D Bios Handleiding - Pagina 7

Blader online of download pdf Bios Handleiding voor {categorie_naam} Fujitsu LifeBook P5010D. Fujitsu LifeBook P5010D 26 pagina's. Lifebook p series

Pagina afdrukken

Secondary Master Submenu of the Main Menu

The Secondary Master submenu identifies which ATA

devices are installed.

Main

Secondary Master [TOSHIBA DVD-ROM SD-R2412 -(SM)]

Type:

Multi-Sector Transfers:

LBA Mode Control:

Transfer Mode:

Ultra DMA Mode:

Help

ESC

Exit

Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu

Menu Field

Options

Type:

• Auto

• None

• Hard Disk

• CD-ROM

Cylinders:

• A number

between 0

and 65,535

Heads:

• A number

between 1

and 16

PhoenixBIOS Setup Utility

Advanced

Security

[Auto]]

[Disabled]

Select Item

-/Space

Select Menu

Enter

Figure 3. Secondary Master Submenu

Default

Description

[Auto]

Selects the ATA/ATAPI device type. Select Auto to have the type

automatically identified by the BIOS at POST. If None is selected, all

of the following Set-up items do not appear. If Hard Disk is selected,

you must specify the number of Cylinders, Heads, and Sectors for

the drive. Select CD-ROM to select parameters for CD-ROM drive.

–—

This item appears only when the type is identified as Hard Disk.

When Hard Disk is selected, you can change the value. This field is

changed by incrementing (pressing the [Spacebar]) or by typing in

the number.

–—

This item appears only when the type is identified as Auto or Hard

Disk. When Hard Disk is selected, you can change the value. This

field is changed by incrementing (pressing the [Spacebar]) or by

typing in the number.

Note: Actual drive label shown may vary. Depending on the

drive type, information such as cylinders, heads and sectors

may also be displayed.

Power

Boot

Info

Item Specific Help

Select ATA/ATAPI drive

installed here.

[Auto]

The BIOS auto-types the

drive on boot time.

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

Change Values

Select

Sub-Menu

M a i n M e n u

Exit

Setup Defaults

F10

Save and Exit