Fujitsu LifeBook S6110 Bios Handleiding - Pagina 6

Blader online of download pdf Bios Handleiding voor {categorie_naam} Fujitsu LifeBook S6110. Fujitsu LifeBook S6110 31 pagina's. Lifebook s series

Pagina afdrukken

L i f e B o o k S S e r i e s N o t e b o o k B I O S

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies what ATA

devices are installed.

Main

Type:

Maximum Capacity:

Multi-Sector Transfers:

LBA Mode Control:

PIO Transfer Mode:

DMA Transfer Mode:

Help

ESC

Exit

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field

Options

Type:

Auto

None

CD-ROM

SuperDisk

Hard Disk

Cylinders:

A number between

0 and 65,535

Heads:

A number between

1 and 16

Sectors:

A number between

0 and 63

Maximum

Display only

Capacity:

PhoenixBIOS Setup Utility

Primary Master [TOSHIBA MK4018GAP -(PM)]

[Auto]

40008MB

[16 Sectors]

[Enabled]

[Fast PIO 4]

[Ultra DMA 5]

Select Item

Select Menu

Figure 2. Primary Master Submenu

Default

[Auto]

–—

Note that actual hard drive label shown may vary.

Depending on the drive type, information such as cylin-

ders, heads and sectors may also be displayed.

-/Space

Change Values

Enter

Select

Sub-Menu

Description

Selects the ATA/ATAPI device type. Select Auto to have the type auto-

matically identified by the BIOS at POST. If None is selected, all of the

following Set-up items do not appear. Select CD-ROM if a CD-ROM

drive is installed at this connection. Select SuperDisk if a SuperDisk drive

is installed at this connection. If Hard Disk is selected, you must specify

the number of Cylinders, Heads, and Sectors for the drive.

This item appears only when Hard Disk Auto is selected. This field is

changed by incrementing (pressing the [Spacebar]) or by typing in the

number.

This item appears only when HArd Disk. This field is changed by incre-

menting (pressing the [Spacebar]) or by typing in the number.

This item appears only when Hard Disk is selected. This field is changed

by incrementing (pressing the [Spacebar]) or by typing in the number.

Displays the maximum capacity of the drive calculated from the parame-

ters of the hard disk when Auto or Hard Disk are selected.

Item Specific Help

Select ATA/ATAPI drive

installed here.

[Auto]

The BIOS auto-types the

drive on boot time.

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

Setup Defaults

F10

Save and Exit