Brother QL-580N Gebruikershandleiding voor netwerken - Pagina 41

Blader online of download pdf Gebruikershandleiding voor netwerken voor {categorie_naam} Brother QL-580N. Brother QL-580N 48 pagina's. Label printer
Ook voor Brother QL-580N: Gebruikershandleiding voor netwerken (42 pagina's), Gebruikershandleiding voor de software (40 pagina's), Gebruikershandleiding voor de software (48 pagina's), Gebruikershandleiding (26 pagina's), Gebruikershandleiding (40 pagina's), Installatie- en bedieningshandleiding (43 pagina's), Gebruikershandleiding (41 pagina's), Installatie- en bedieningshandleiding (43 pagina's)

Appendix C

Menu Bar

1 Apply Settings to the Printer

Applies the settings to the printer; functions the same way as the Apply button in the main window. See

Apply uu page 33.

2 Save Command Settings

Saves network settings in PJL command format. The file extension is ".bin".

By sending these commands to printers via USB, network settings for printers can be configured in the

same way as when settings are made using the Network Setting Tool (uuUser's Guide: Mass Storage).



The following information is not saved in the command settings file.

• Node name

• IP address, subnet mask, gateway address (when the IP address is set to STATIC).



These command settings are only intended to be used to apply printer settings. Saved commands cannot

be imported to the Network Setting Tool.



Saved command files contain authentication keys and passwords. Take necessary measures to protect

saved command files such as by saving command files in locations that other users cannot access.



Do not send the command file to a printer whose model was not specified when the command file was

exported.