Brother QL-600 Handleiding voor snelle installatie - Pagina 5
Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother QL-600. Brother QL-600 9 pagina's.
Pagina afdrukken
4. Load the DK Roll
1.
Make sure the Label Printer is turned Off.
2.
Hold the Label Printer by the front, and firmly lift the DK
Roll Compartment Cover to open it.
3.
Place the DK Roll into the Roll Spool Guide (1).
• Make sure that the Roll Spool Arm (2) is inserted firmly
in the Roll Spool Guide.
• Make sure the Stabilizer (3) slides into the notch in the
Label Printer.
4.
Thread the DK Roll through the Label Printer.
• Align the edge of the DK Roll with the upright edge of
the Label Output Slot.
• Check that the DK Roll is threaded straight so that the
labels are not skewed.
• Push the first label through the Label Output Slot until
the end comes out of the slot, as shown.
5.
Close the DK Roll Compartment Cover.
IMPORTANT
IMPORTANT
• Do not leave any printed labels in the Label Printer. Doing so will cause the labels to jam.
• When not in use, remove any DK Rolls from inside the Label Printer and close the DK Roll Compartment Cover to
prevent dust and debris from accumulating in the Label Printer.
3
1
2