Brother QL-820NWB Handleiding productveiligheid - Pagina 4
Blader online of download pdf Handleiding productveiligheid voor {categorie_naam} Brother QL-820NWB. Brother QL-820NWB 11 pagina's. Dk label. dk tape
Ook voor Brother QL-820NWB: Handleiding voor snelle installatie (10 pagina's), Handleiding voor snelle installatie (10 pagina's), Installatiehandleiding (8 pagina's), Handmatig (2 pagina's)
Pagina afdrukken
Important safety instructions
Battery Unit (Rechargeable Li-ion Battery included) (Optional: QL-810W/820NWB only)
DO NOT leave a drained Battery Unit in your printer for a long period of time. This could shorten the
life of the Battery Unit.
DO NOT use or leave the Battery Unit near a fire, heaters, or other high temperature (above 80 °C)
locations.
If your printer can be used only for a short period of time, even though the rechargeable battery
is fully charged, the rechargeable battery may have reached the end of its service life. Replace
the rechargeable battery with a new one. When removing and replacing the rechargeable
battery, cover the terminals of the old rechargeable battery with tape to avoid creating a short in
the rechargeable battery.
Keep the Battery Unit out of the reach of children, particularly infants, otherwise injury may
occur.
Battery Unit (Rechargeable Li-ion Battery included) (Optional: QL-810W/820NWB only)
If your printer is not fully charged after the specified amount of time has passed, stop charging it,
otherwise a fire, electrical shock, or damage may occur.
DO NOT charge the rechargeable battery with a printer or AC Adapter other than that specified.
A fire, electrical shock, or damage may occur.
When shipping your printer, make sure you remove the rechargeable battery from the printer before
packaging for shipment.
If your printer is shipped with the rechargeable battery installed, there is a risk of fire, explosion, and
damage.
DO NOT insert foreign objects into your Battery Unit or its connectors, otherwise a fire, electrical
shock, or damage may occur.
If foreign objects are dropped into your Battery Unit, immediately turn it off, disconnect the AC Adapter/
AC Power Cord from the electrical socket, and then contact Brother customer service or your local
Brother dealer. If you continue to operate your Battery Unit, a fire, electrical shock, or damage may
occur.
DO NOT operate, charge, or store your Battery Unit in the following locations, otherwise leaking,
fire, electrical shock, or damage may occur:
Near water, such as in a bathroom or near a water heater, or in an extremely humid location
In a location where it is exposed to rain or moisture
In an extremely dusty location
In an extremely hot location, such as near open flames, heaters, or in direct sunlight
In a closed car under a hot sun
In a location where condensation may form
DANGER
WARNING
3