Fujitsu P1620 - LifeBook - Core 2 Duo 1.2 GHz Aan de slag
Blader online of download pdf Aan de slag voor {categorie_naam} Fujitsu P1620 - LifeBook - Core 2 Duo 1.2 GHz. Fujitsu P1620 - LifeBook - Core 2 Duo 1.2 GHz 2 pagina's. P1620 getting started guide
Ook voor Fujitsu P1620 - LifeBook - Core 2 Duo 1.2 GHz: Bios Handleiding (27 pagina's), Eenvoudige handleiding (37 pagina's)
Pagina afdrukken
This convenient guide will lead you through the start-up
process and will also offer some valuable tips.
What's in the Box
Check to see that all of the following items are in the box:
❏ LifeBook Notebook
❏ Drivers and Application Restore disk
❏ Lithium ion battery (installed)
❏ Pen
❏ AC adapter with power cord
❏ Recovery disc
Depending upon your confi guration, the following may also be included:
❏ Additional lithium ion main battery
❏ Third party application disc(s)
❏ Port Replicator
Controls, Connectors,
and Access Points
Built-in Microphone
Fingerprint Sensor
LifeBook Security/Application
Panel Buttons
Speaker
Quick Point
Pointing Device
Keyboard
RIGHT PANEL
BACK PANEL
Headphone Jack
Microphone Jack
External Video Port
(behind cover)
Pen/Pen Holder
USB 2.0 Ports
DC Power Jack
LAN (RJ-45) Port
Secure Digital (SD) Card Slot
Modem (RJ-11) Port
LEFT PANEL
BOTTOM PANEL
Memory Upgrade
Compartment
Main Unit and
Confi guration
WLAN/Bluetooth
Label
On/Off Switch
(approximate
PC Card Eject Button
PC Card Slot
location)
Initial Start Up
Latch
AC Adapter
AC Cable
Display Panel Latch
Display Panel
Status Indicator
Panel
Wireless
LAN
Switch
Power/Suspend/Resume Button
(For
Status Indicator
Additional
Utilities)
Panel
CLICK ME
"Click Me!"
1. Open the Display Panel
•
Ensure that your LifeBook is on a hard level surface and that
the air vents are not blocked.
•
Lift the display, being careful not to touch the screen.
•
Adjust the display until it is at a comfortable viewing angle.
2. Connect AC Power
•
Plug the AC adapter into your notebook.
•
Plug the power cord into the AC adapter.
Air Vents
•
Connect the power cord to an electrical outlet.
Anti-Theft Lock Slot
3. Connect to Internet or Network
• Connect either a phone cord to the modem port or an Ethernet
Battery Latches
cable to the LAN port on your notebook and to a wall jack or to
Lithium ion
an Ethernet router. (See back panel drawing for port locations.)
Battery
Important:
Air Vents
• During the setup procedure, do not disconnect the power supply,
press any buttons, or use any peripheral devices such as a mouse,
keyboard, or remote control.
Port Replicator
•
You should not attach any external devices and do not put a DVD/
Connector
CD in your drive until you have gone through the initial power
on sequence.
4. Booting the System
The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
•
Press the Suspend/Resume/Power button (above the keyboard) to
turn on the notebook. When you do this for the fi rst time, it will display
a Fujitsu logo on the screen. If you do nothing the system will load
the operating system, and then the Windows Welcome will begin.
5. Register
®
®
For Genuine Microsoft
Windows
XP:
DC Power Jack
•
After the operating system has initialized, enter the information
DC Output
as prompted to personalize your notebook and confi gure your
Cable
modem to dial.
For Genuine Windows Vista™:
®
®
•
Accept the Microsoft
Windows
Licensing Agreement and the
Fujitsu End User License Agreement to proceed.
•
Select your User ID and Password during the "Welcome Screen."
• Keep a record of your User ID and password stored in a secure place.
• THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO MINUTES.
• DO NOT ATTEMPT TO TURN POWER ON OR OFF DURING THIS STAGE.
6. Registering Your LifeBook notebook
Power/Suspend/Resume
•
Register your notebook with Fujitsu Service and Support via our
Button
website at us.fujitsu.com/computers.
•
You will need to be set up with an Internet Service Provider (ISP)
to register online.
7. Installing Click Me!
•
Check to be sure the WLAN switch is on.
®
®
For Genuine Microsoft
Windows
XP: The fi rst time you boot up
your system, you will see an icon called Click Me! in the Start menu.
For Genuine Windows Vista™: In addition to an icon on the
desktop, a dialog box will automatically open that prompts you
to run Click Me!. If you choose not run ClickMe! at this time,
the ClickMe! icon will appear on your desktop.
(For
•
When you click the Click Me! icon, your system will automatically
Latest
Drivers)
build the icon tray in the bottom right of the screen. These icons
provide links to utilities that you will frequently access.
8. Convert to Tablet Confi guration
(FDU)
ROTATE THE SYSTEM DISPLAY ONLY IN THE DIRECTION
INDICATED IN THIS PROCEDURE.
TURNING THE DISPLAY IN THE INCORRECT DIRECTION COULD
DAMAGE THE HINGE.
IN THE FOLLOWING STEP, BE SURE TO POSITION THE DISPLAY
PERPENDICULAR TO THE KEYBOARD, OTHERWISE THE KEY-
BOARD OR DISPLAY COVER COULD GET SCRATCHED.
Top Latch
Bottom Latch
•
Open notebook and lift display so it is perpendicular to keyboard
•
Rotate display 180 degrees (either direction)
•
Carefully fold display down onto keyboard
•
Push latch down towards display
•
Reverse this procedure to return to notebook confi guration.
Be sure to rotate display in opposite direction.
9. Calibrate the Touch Screen
Note: Only use stylus tip for calibrating. Touching screen with
your fi ngers will require restarting calibration process.
•
Go to Start -> Control Panel. If you are not in Classic View,
select "Switch to Classic View" in the left panel.
• Windows XP Tablet PC Edition: Double-click the Tablet and Pen
Settings icon and select the Settings tab .Windows XP Professional:
Double-click the Touch Panel icon and select the Calibration tab.
Windows Vista: Double-click the Tablet PC Settings icon and
select the General tab.
•
Click the [Calibrate] or [Calibrate Now] button.
•
Adjust the display of your notebook to a comfortable angle and
fi nd the (+) symbol in the upper-left corner of the display.
•
Using the stylus, fi rmly touch the screen directly on the (+)
symbol. Lift the stylus from the screen and the target will
move to a different location on the screen.
•
Repeat step 4 until you have selected all of the (+) symbols.
•
Once you have selected all the symbols, press the [OK] button.
•
Touch the stylus to various points on the screen to verify that the
screen is correctly calibrated. If you are not satisfi ed with the
screen's calibration, press the [Calibrate]) button to begin again.
10. Install Additional Software
•
Close any open programs, applications or utilities
•
Insert software application disc into media drive
•
Open the application folder, select the set-up icon,
and load desired software, as shown in the table.
•
Restart your computer.
11. Access your User's Guide
•
To take advantage of all the features of your new Fujitsu LifeBook
notebook, it is highly recommended that you read your electronic
User's Guide. It contains important detailed information about
your new computer. You can access your User's Guide by
selecting its icon from the screen desktop.
Common Indicators
Status Indicator Panel
The Status Indicator Panel is located above the
keyboard. Following are some common indicators.
Power Indicator
The Power indicator symbol located on
the power button shows whether your
system is operational. When it is lit blue,
it means that there is power to your
computer and that it is ready for use.
Battery Level Indicator
Display Side
Indicates whether the Lithium ion battery
is installed and charging, and how much
charge is available within the batteries.
Green: The battery is installed
and fully charged.
Amber: The battery is installed and is
approximately half charged.
Red: The battery charge is low and it
should be charged with an adapter
or replaced with a charged battery.
BATTERIES SUBJECTED TO SHOCKS,
VIBRATION OR EXTREME TEMPERATURES
CAN BE PERMANENTLY DAMAGED.
LifeBook Security/
Applications Panel
The six buttons are located on
the bottom left-hand side of the
display when it is confi gured
as a notebook.
Four of the buttons have secondary
functions. To activate secondary
functions, the Function (Fn) Button
should be pressed fi rst and then
the application button. Be sure and
see your User's Guide on how to
set up and use all the features of
the Security Panel.
BUTTON PRIMARY FUNCTION
Application A/
1
Page Down
Application B/
2
Page Up
3
Screen Rotation
Function
4
Selection
5
(Not
Enter Button/
numbered
Ctl-Alt-Del
on
button)
6
(Not
Backlight/
numbered
Application C
on
Button
button)
Caution: Your system is
confi gured with Trusted
Platform Module (TPM)
IF THERE IS NO BATTERY ACTIVITY
Before you activate TPM, be sure
AND THE POWER ADAPTERS ARE NOT
you fully understand how it works
CONNECTED, THE BATTERY LEVEL
by following the directions included
INDICATORS WILL ALSO BE OFF.
on the TPM applications CD. If you
choose to enable TPM, your TPM
Hard Drive Access Indicator
password will be critical to the
Lights green when your internal hard drive
operation of your computer and
is being accessed.
MUST be remembered.
NumLk Indicator
Shows that the integral keyboard is set
in ten-key numeric keypad mode.
Drivers
CapLock Indicator
Look for the latest drivers on the
Shows that your keyboard is set to type
Drivers and Applications Restore
in all capital letters.
CD. Right-click the FDU icon and
ScrLk Indicator
select "update", or download
Shows that your scroll lock is active.
them at us.fujitsu.com/computers.