Brother TD-4000 Gebruikershandleiding - Pagina 32

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Brother TD-4000. Brother TD-4000 37 pagina's. Serie td impressora de etiquetas
Ook voor Brother TD-4000: Gebruikershandleiding voor de software (40 pagina's), Handmatig (20 pagina's), (Spaans) Gu (40 pagina's)

Pagina afdrukken

STEP 3 Reference

Reference

2 Troubleshooting

If a problem occurs while using this machine, the following may help you to solve the

problems.

Problem

The Brother TD-4000/4100N

machine printer does not print,

or a printing error is received.

The LED lamp is not lit.

The printed label contains

streaks or poor quality

characters, or the label did not

feed correctly.

A data transmission error

appears on the computer.

Labels are jammed in the cutter

or are not ejected correctly after

printing.

The label is not ejected correctly

after printing.

The print quality is poor

• Is the cable loose?

Check that the cable is connected securely.

• Is the RD Roll installed correctly?

If not, remove the RD Roll and reinstall it.

• Is the RD Roll used up?

Replace the RD Roll.

• Is the RD Roll compartment cover open?

Check that the RD Roll compartment cover is closed correctly.

• Has a print error or transmission error occurred?

Turn off the machine and switch on again. If the problem still

occurs, contact Brother Customer Service.

• Does the guide not touch the left side of the paper RD Roll?

Move the guide against the side of the RD Roll.

• Is the media on top of the gap sensor?

Feed the media under the gap sensor.

• Is the power cord plugged in correctly?

Check that the power cord is plugged in. If inserted, try plugging

it into another electrical outlet.

• Has the main power switch located on the back of the machine

been turned on?

Make sure the main power switch is turned on.

* If the power button still does not light up, contact Brother

Customer Service.

• Is the print head or roller dirty?

While the print head generally remains clean under normal use,

lint or dirt from the roller may become stuck on the printer head.

If this occurs, clean the roller.

See

"Roller maintenance" on page 28.

• Is the correct port chosen?

Check that the correct port is chosen from the "Print to the

following port" list in the Printer Properties dialog box.

• Is the machine in cooling mode (the LED lamp is flashing in

orange)?

Wait until the LED lamp stops flashing and then try printing

again.

• Is someone printing via network (TD-4100N only)?

If you try to print while other users are printing large amounts of

data, the printer is unable to accept your print job until the

ongoing printing is finished. In such situations, execute the print

job again after the other jobs are completed.

• Is there dirt or lint on the roller preventing it from rolling freely?

For details, please see

• Check that the ejection path of the label is not blocked.

• Check that the RD Roll is set correctly by removing the RD Roll

and reinstalling.

• Ensure that the RD Roll compartment cover is closed correctly.

• Is there dirt or lint on the roller preventing it from rolling freely?

Clean the roller. For details, please see

maintenance" on page 28.

Solution

"Roller maintenance" on page 28.

"Roller