Fujitsu S6240 Bios Handleiding - Pagina 8

Blader online of download pdf Bios Handleiding voor {categorie_naam} Fujitsu S6240. Fujitsu S6240 29 pagina's. Lifebook s series

Pagina afdrukken

L i f e B o o k S S e r i e s N o t e b o o k B I O S

Table 3: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field

Options

■

Transfer Mode:

Standard

■

Fast PIO 1

■

Fast PIO 2

■

Fast PIO 3

■

Fast PIO 4

■

Multiword DMA 1

■

Multiword DMA 2

■

Ultra DMA

Disabled

Mode:

■

Mode 0

■

Mode 1

■

Mode 2

■

Mode 3

■

Mode 4

■

Mode 5

■

A bootable CD-ROM may have either a floppy disk or hard drive format. When the bootable CD-ROM is

used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format

CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive for-

mat) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: des-

ignation if a formatted internal hard drive is present since the C: designator is always reserved for the

internal hard drive. The boot sequence ignores the new drive designations, however, your application

software will use the new designations.

Be aware of the operating environment when booting from a CD-ROM or you may overwrite files by

■

mistake.

Exiting from Main Menu

When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to

another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit

menu or to move to another menu.

Default

Description

[Standard]

Selects the method for moving data to/from the drive. Autotype the

drive to select the optimum transfer mode. This option cannot be

changed when Auto is selected.

[Disabled]

Selects the method for moving data to/from the drive. Autotype the

drive to select the optimum transfer mode. This option cannot be

changed when Auto is selected.