Brother DCP120C - Flatbed Multifunction Photo Capture Center Snelstarthandleiding - Pagina 21

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Brother DCP120C - Flatbed Multifunction Photo Capture Center. Brother DCP120C - Flatbed Multifunction Photo Capture Center 33 pagina's. Quick setup guide - french
Ook voor Brother DCP120C - Flatbed Multifunction Photo Capture Center: Handleiding voor snelle installatie (24 pagina's), Referentielijst onderdelen (30 pagina's), Handleiding voor snelle installatie (33 pagina's), (Frans) Snelle installatiegids (24 pagina's)

Installing the Driver & Software

Carefully guide the USB cable into the trench

as shown below, following the trench around

and toward the back of the machine.

Improper Setup

• DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

• Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Lift the scanner cover to release the lock.

Gently push the scanner cover support down

and close the scanner cover.

Turn on the machine by plugging in the power

cord.

Choose USB and then click OK.

Click GO, then Applications.

Double-click the Utilities folder.

Double-click the Printer Setup Utility icon.

Note

For Mac

OS X 10.2.x users, open Print Center

icon.

Click Add.

Choose USB. (For Mac OS

users)

Note

X 10.4 users, go to step 19.

For Mac OS

Macintosh

X 10.2.4 to 10.3