Fujitsu ETERNUS DX Disk Configuratiehandleiding - Pagina 26

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 31 pagina's. Server connection, fcoe for linux driver settings for converged network adapter cards
Ook voor Fujitsu ETERNUS DX Disk: Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (44 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (29 pagina's), Configuratiehandleiding (25 pagina's), Configuratiehandleiding (32 pagina's), Configuratiehandleiding (35 pagina's), Configuratiehandleiding (43 pagina's), Configuratiehandleiding (21 pagina's), Configuratiehandleiding (24 pagina's)

Chapter 9

Checking the Connected Devices

9.1

To turn on the connected devices, use the following procedure:

Turn on the ETERNUS DX.

Check that the Ready LED is lit on the ETERNUS DX.

Turn on the server.

9.2

Check the LUNs using the following procedure:

Open [Device Manager] to show [Disk drives].

If the ETERNUS DX storage systems' LUNs are recognized by the server, the ETERNUS DX storage sys-

tems' device (LUNs) are displayed under [Disk drives].

For multipath configuration with Windows Server

R2, Windows Server

shows as a single "Multi-Path Disk Device".

2012, Windows Server

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows

2019, Windows Server

2008 R2, or Windows Server

2016, Windows Server

2012

2008, each ETERNUS DX LUN

P3AM-3442-18ENZ0