Fujitsu PRIMEPOWER 2500 Hardware Platform Handleiding - Pagina 24
Blader online of download pdf Hardware Platform Handleiding voor {categorie_naam} Fujitsu PRIMEPOWER 2500. Fujitsu PRIMEPOWER 2500 50 pagina's. Enterprise servers
Ook voor Fujitsu PRIMEPOWER 2500: Handmatig (21 pagina's)
Parameter
Role_A
4.3.2.1.2
How to Set Parameter
The method of setting up of each parameter of the secondary LAN port (FJSV,pwga) shown in Table 4.1 is
explained. If using PCI card (PW008GE4/PW008GE5/PW008QG1), please refer to the User's guide
attached with PCI card.
1.
Search /etc/path_to_inst file for a fjgi interface.
# grep fjgi /etc/path_to_inst <Return>
"/pci@83,4000/FJSV,pwga@1" 0 "fjgi"
2.
The interface-related parameters should be written in the /platform/sun4us/kernel/drv/fjgi.conf file.
-
name="fjgi" parent="/pci@83,4000" unit-address="1" AutoNegotiation_A="On"
LinkSpeed="100" DuplexCapbilities_A="Full" FlowControl_A="None";
name:
parent:
unit-address: Please refer to the /etc/path_to_inst, and write the number (right number of
3.
After 2, the fjgi.conf setting is reflected by reboot.
# /usr/sbin/shutdown -i6 -y -g0 <Return>
4.3.2.1.3
Caution
-
Setting by fjgi.conf is necessary only when autonegation is not used for speed/duplex/flow or
connecting partner cannot support autonegotiation.
-
Since a setup the operation mode by the fjgi.conf file becomes effective per physical interface,
when the VLAN interface is being used, a VLAN interface is also changed simultaneously.
4.3.2.2
Setting a JumboFrame
Use of JumboFrame makes it possible to expand the TCP/IP MTU size from 1500 to 9000. As the
per-packet transmission size is expanded, the number of packets processed becomes fewer and thus the CPU
load is reduced.
The procedure of setting JumboFrame is show below.
a.
set fjgi:fjgi_jumbo=1
b.
vi /etc/fjmtu.fjgiX
"X" is instance number. Instance number must be the same as /etc/hostname.fjgi* file's *.
Notes
18
Auto (Default)
Master
Slave
Example: 1000Mbps Full-Duplex is set.
In the above example, the driver name is "fjgi".
The left-hand portion of the pathname, containing the words '/FJSV,gwga@' in
/etc/path_to_inst, is to be added here.
In this example, parent value is "/pci@83,4000".
"/FJSV,pwga@..". In this example, unit-address value is "1".
Add the following line to /etc/system file.
Create /etc/fjmtu.fjgiX file and write a MTU-size between 1500 to 9000. And reboot, TCP/IP
MTU-size will be set. If you don't create this file, TCP/IP MTU-size will be the default of 9000.
Value
Auto select Master or Slave by the
partner. (This can be set when
AutoNegotiation_A= On.)
Communicate by Master.
Communicate by Slave.
Description