Fujitsu PRIMERGY BX600 Handleiding starten

Blader online of download pdf Handleiding starten voor {categorie_naam} Fujitsu PRIMERGY BX600. Fujitsu PRIMERGY BX600 13 pagina's.

��

n PRIMERGY BX600 Manuals

Manuals for this server can be accessed from the section below of the PRIMERGY Document & Tool CD.

[CD-ROM Drive] :\MANUAL\INDEX.PDF

Manuals can be displayed using Acrobat

*This manual corresponds with BX600 S3 Blade Server System Unit and BX620 S4 Server Blade. For chassis and server blades not described in

this guide, refer to the corresponding manual on the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).

Checking the items

supplied

Check the contents in the package using

the "Contents List".

If any items are missing, inform an office listed in

the "Contact Information".

Checking location before installing the server

For details on installing the rack, refer to the "Installation Guide for the RACK" and manuals provided with the rack.

nConditions

When installing this server avoid the following areas.

- Humid, dusty, or oily areas

- Poorly ventilated areas

- Areas close to fire or other sources of heat

- Areas close to water

- Areas close to direct sunlight or near heating appliances

- Areas with a temperature of below 10°C or above 35°C

- Areas with humidity of less than 20% or more than 80%

- Salty areas

- Areas where corrosive gas is generated

- Areas where cables become trip hazards

- Areas where strong magnetic fields are generated, such as near TVs and speakers

- Areas where the device is not stable and could tip over and hurt somebody

In dusty areas, dust will quickly stick to the front and backside of the server. Since this can cause failure, changing the

installation place is recommended.

Be sure to secure the rack with stabilizers to prevent the device from tipping over.

BX600

Reader

or Adobe

Reader

. If using Acrobat

Reader

, use version 5.0 or later.

Reading and understand-

ing "Safety Precautions"

Before using this server, be sure to read and un-

derstand the attached "Safety Precautions".

Also check it when connecting, installing internal options

and setting up this server.

B7FH-4871-01EN-00