Fujitsu PRIMERGY BX900 S1 Handleiding Service Supplement - Pagina 39

Blader online of download pdf Handleiding Service Supplement voor {categorie_naam} Fujitsu PRIMERGY BX900 S1. Fujitsu PRIMERGY BX900 S1 46 pagina's.

Replacement routines

Step 4: Connecting the front docking board

Figure 25: Anchoring the front docking board

Ê Make sure that the LCD cable is completely inside the side cover.

Ê Connect the front docking board to the two guide pins (1) of the midplane

connector and push it forward as far as it will go. When it is in its final instal-

lation position, it clicks into place in the side cover.

Step 5: Connecting and installing the Local Service Panel

Ê Pull the free end of the new LCD cable out of the system unit using the old

cable.

Ê Remove the adhesive tape.

Ê Remove the old LCD cable from the Local Service Panel and connect the

new one, see

Ê Reinstall the Local Service Panel. Proceed in reverse order to that described

page

30.

BX900 S1

page

32.

Service Supplement

Replacing the front docking board