Fujitsu PRIMERGY CX122 S1 Bedieningshandleiding - Pagina 28
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Fujitsu PRIMERGY CX122 S1. Fujitsu PRIMERGY CX122 S1 50 pagina's.
Pagina afdrukkenInstalling / replacing a PRIMERGY CX122 S1 server
Figure 3: Removing a server from the system unit (B)
Ê Loosen the two knurled screws on the front cover (1).
Ê Carefully slide the server out of the rack (2).
V
CAUTION!
Please keep in mind, that PRIMERGY CX122 S1 server nodes will tip
over or fall out of the rack if slid out too far!
Ê Remove the defective server.
V
CAUTION!
When removing a PRIMERGY CX122 S1 server from the system unit
that is not replaced immediately, always install a dummy cover in the
empty installation bay. For further information please refer to the
operating manual of PRIMERGY CX1000.
28
Operating Manual
CX122 S1