Fujitsu PRIMERGY RX200 S8 Systeemconfigurator en bestelinformatiehandleiding - Pagina 9
Blader online of download pdf Systeemconfigurator en bestelinformatiehandleiding voor {categorie_naam} Fujitsu PRIMERGY RX200 S8. Fujitsu PRIMERGY RX200 S8 28 pagina's. System configurator and order-information guide
Pagina afdrukken
- 1. Table of Contents
- 2. Memory
- 3. Accessible Drives
- 4. Fibre-Channel Controller
- 5. Communication/Network
- 5. Independent Channel Mode
- 5. Mirrored Channel Mode
- 5. Performance Channel Mode
- 5. Rank Sparing Mode
- 6. System Management Products (Remoteview)
- 7. Miscellaneous
- 8. Country Specific Power Cord
- 9. Change Report
C
PRIMECENTER Rack
S26361-F2735-E145
RMK-F1_DI_CMA_QRL
best choice for PrimeCenter racks
consisting of
vario carrier 714-785mm
telescopic drop-in rails 781mm
with quick release lever support
with full extraction
with CMA adapter
1x per system
S26361-F4530-E11
Mounting 1U server in
asymmetrical
racks
with 1U support bracket
S26361-F2735-E81
Cable mgmt. arm for 1U server
- for Fujitsu PRIMECENTER S2
or all PRIMECENTER M1 racks
- for 3rd Party racks
1x per system
S26361-F1647-E302
Installation ex works for one
server or subsystem.
Hereby the rack will be delivered
completely pre-mounted and
all wired connections are tested.
With PCR S2 12U, 24U, 38U and
PRC M1 16U, 24U, 42U:
Systems and components
will be delivered installed in the rack
With PCR S2 racks 46U:
Systems and components
will be delivered separately
To be ordered only together with
a PRIMECENTER rack
PCR S2 e.g. S26361-K826-V10x
new PCR M1 e.g. S26361-K827-Vxxx
refer PCR S2 or M1 rack configurator
max. 1x per System
D
S26361-F2735-E175
Rack Mount Kit F1-C S7 LV
best choice for 3rd party racks
consisting of
vario carrier 559-914mm
telescopic drop-in rails 781mm
with quick release lever support
with full extraction
with CMA adapter
1x per system
S26361-F4530-E10
Mounting in
symmetrical
racks
(no support bracket needed)
Cable Management Arm can
only be used for FTS RMKs
with CMA adapter
"Rack-mounting ex factory"
This service is to be ordered once
per installable server/storage
subsystem, in order to get the
server/storage subsystem
mounted into the racks.
In case of the 46 U PCR S2
this service has to be ordered,
to get the mounting kits and the
cables installed.
PRIMERGY Classic 19" rack is not supported
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY RX200 S8
S26361-F2735-E111
Further information for
No Rackmount-Kit option
rack mounting is available
Only for loose deliveries
within the
No mounting in racks possible
Corporate Partner Portal
max. 1x per system
All "L" no's for loose delivery
S26361-F2735-L10
Adapter angle PC/DC-Rack, till 50Kg
B
necessary for mounting RMKs in
asymmetrical PC racks
S26361-F2735-L145
RMK-F1_DI_CMA_QRL
best choice for PrimeCenter racks
with CMA adapter
S26361-F2735-L175
RMK-F1_DI_CMA_QRL_LV
best choice for 3rd party racks
with CMA adapter
S26361-F2735-L81
Cable mgmt. arm for 1U server
for 1U servers in racks with L175
S26361-F2735-L176
RMK-F1_DI_QRL_LV
best choice for 3rd party racks
w/o CMA adapter
S26361-F2735-L8
cable arm 1U PCR M1 S and 3rd p.-racks
for L176, has to be mounted on rack pillar
S26361-F2735-L7
Lateral cable management (optionally)
can only be mounted
in asymmetrical PRIMECENTER
S2 or new M1 racks in 1U above RMK
Status 30-01-2014
9 of 28