Fujitsu PRIMERGY TX300 S3 Handleiding Service Supplement - Pagina 18

Blader online of download pdf Handleiding Service Supplement voor {categorie_naam} Fujitsu PRIMERGY TX300 S3. Fujitsu PRIMERGY TX300 S3 47 pagina's.

Preparation

Ê Pull out the two green locking buttons of the front cover.

Ê Pull the front cover forward slightly at the lower edge.

Ê Unhook the front cover at the top and remove it.

4.1.2

Rack model

You will find a detailed description of 'Opening the server' and 'Removing

the rack front cover' in the Options Guide TX300 S3.

Ê Terminate all applications and shut down the server correctly.

Ê If your operating system has not switched off the server, press the on/off

button.

Ê Pull all power connectors out of the power outlets.

4.1.2.1

Ê Loosen the four knurled screws and pull the server as far as possible out of

the rack.

Depending on how accessible the server is in the rack cabinet, it can make

sense to remove it from the cabinet. You will find a detailed description in the

Options Guide or the Operating Manual.

Ê Open the latch.

Ê Push back the top cover approxiate 2 cm.

Ê Remove the top cover.

4.1.2.2

Removing the rack front cover

Remove the rack front cover when making the following replacements:

– Replacing the operating panel

– Replacing the intrusion switches

Ê Remove two screws on either side.

Ê Remove the rack front cover to the front together with the plastic cover.

Service Supplement

Replacement routines

TX300 S3