Fujitsu SPARC Enterprise M3000 Product opmerkingen - Pagina 11

Blader online of download pdf Product opmerkingen voor {categorie_naam} Fujitsu SPARC Enterprise M3000. Fujitsu SPARC Enterprise M3000 38 pagina's.
Ook voor Fujitsu SPARC Enterprise M3000: Aan de slag handleiding (8 pagina's), Veiligheids- en nalevingshandleiding (34 pagina's), Product opmerkingen (42 pagina's)

An administrator group has platadm, useradm, and auditadm privileges

associated with it. An operator group has platop, and auditop privileges

associated with it. To configure a custom group, both group name and privileges are

required. For each type of group, up to five groups can be configured. A user

assigned to more than one group receives the sum of all privileges associated with

those groups.

To support these new features, two new configuration screens (Active Directory

and LDAP over SSL) have been added to the Settings menu of the XSCF Web.

Remote users can log in and use the XCSF Web once they have been authenticated

by Active Directory or LDAP/SSL.

Configuring XSCF for Active Directory Support

The commands setad(8) and showad(8) let you set and view the Active Directory

configuration from the command line.

By default, Active Directory support is disabled. To enable Active Directory support,

use the following command:

XSCF> setad enable

To disable Active Directory support, use the following command:

XSCF> setad disable

To show if Active Directory support is enabled or disabled, enter:

XSCF> showad

Use the setad(8) command with its various parameters to configure Active

Directory. For example, you can use it to set up one primary and five alternate

Active Directory servers, assign group names and privileges, configure a particular

user domain, control logging of diagnostic messages, and more. User domain can be

configured explicitly through the setad userdomain command on XSCF, or

entered at login prompt using the form, user@domain.

See the setad(8) and showad(8) man pages, and the note about these commands in

TABLE 11

General Information About XCP 1091