Brother MFC 240C - Color Inkjet - All-in-One Handleiding voor snelle installatie - Pagina 10

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother MFC 240C - Color Inkjet - All-in-One. Brother MFC 240C - Color Inkjet - All-in-One 26 pagina's. Windows vista
Ook voor Brother MFC 240C - Color Inkjet - All-in-One: Handleiding voor snelle installatie (26 pagina's), Servicehandleiding (5 pagina's), Handleiding voor snelle installatie (27 pagina's), Installatiehandleiding (23 pagina's), Servicehandleiding (17 pagina's)

STEP1

Setting Up the Machine

Carefully remove the protective yellow cap (1).

Improper Setup

DO NOT touch the area shown in the

illustration below.

Note

If the protective yellow cap comes off when you

open the bag, the cartridge will not be damaged.

Install each ink cartridge in the direction of the

arrow on the label.

Take care to match the colour of the lock

release lever (1) with the cartridge colour (2),

as shown in the diagram below.

brother

XXXX

Lift each lock release lever and push it until it

clicks, and then close the ink cartridge cover.

Note

If the LCD shows Install Black,

Install Yellow, Install Cyan or

Install Magenta after you install the ink

cartridges, check that the ink cartridges are

installed properly.

The machine will clean the ink tube system for

use for the first time. This process will occur

only once, the first time ink cartridges are

installed. The cleaning process will last

approximately four minutes.

The LCD shows:

Preparing System

Approx 4 Minutes

Cleaning

Please Wait