Fujitsu SPARC Enterprise M5000 Product opmerkingen - Pagina 14
Blader online of download pdf Product opmerkingen voor {categorie_naam} Fujitsu SPARC Enterprise M5000. Fujitsu SPARC Enterprise M5000 44 pagina's. Rci build procedure
Ook voor Fujitsu SPARC Enterprise M5000: Functies Handleiding (30 pagina's), Aanvullende handleiding (36 pagina's), Aan de slag handleiding (4 pagina's)
Pagina afdrukken
Known Issues
This section describes known issues in this release.
General Functionality Issues and Limitations
Caution – For dynamic reconfiguration (DR) and hot-plug issues, see
Domains using the ZFS file system can not use Dynamic Reconfiguration.
■
SPARC Enterprise M4000/M5000 servers are cold service machines. Hot-
■
swapping of the CPU/Memory board unit (CMU), I/O Unit (IOU), or any
eXtended System Control Facility (XSCF) unit is not supported.
For this XCP release, the XSCF web browser interface, also known as the browser
■
user interface (BUI) does not support the External I/O Expansion Unit Manager
feature.
The XSCF web browser interface, also known as the browser user interface (BUI),
■
supports new feature concerning the COD configuration.
The XSCF does not support the Log Archiving feature.
■
When using XSCF as the NTP server of the domain, configure it so as not to block
■
the ICMP protocol of the DNS server and the NTP server which the XSCF refers
to.
When you use the external power control interface (EPC) of the external power
■
controller, the following notification signals are not supported;
■
■
For 1027A-Z/X1027A-Z, PCIe Dual 10 Gigabit Ethernet Fiber XFP cards, these
■
limits apply:
■
■
For 4447A-Z/X4447A-Z, PCIe Quad-port Gigabit Ethernet Adapter UTP cards,
■
these maximum limits apply:
■
■
■
4
SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1060 • February 2008
the OS panic or the server hardware error signal (*CPUN/RTNU)
the server hardware error signal (power fail, temperature error, and fan error)
(*ALARM)
Do not use more than two cards in an External I/O Expansion Unit.
Do not use these cards in an External I/O Expansion Unit.
No more than two cards per I/O boat
No more than four cards in a SPARC Enterprise M4000 server
No more than eight cards in a SPARC Enterprise M5000 server
.
TABLE 7