Brother MFC-5840CN Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Brother MFC-5840CN. Brother MFC-5840CN 44 pagina's. Brother internet fax user's guide
Ook voor Brother MFC-5840CN: Handleiding voor snelle installatie (37 pagina's), Handleiding voor snelle installatie (39 pagina's), Servicehandleiding (8 pagina's)

In order to enable BOOTP, simply use an editor to delete the "#" (if

there is no "#", then BOOTP is already enabled). Then edit the

BOOTP configuration file (usually /etc/bootptab) and enter the name,

network type (1 for Ethernet), Ethernet address and the IP address,

subnet mask and gateway of the Print / Fax server. Unfortunately,

the exact format for doing this is not standardized, so you will need

to refer to your system documentation to determine how to enter this

information (many UNIX systems also have template examples in

the bootptab file that you can use for reference). Some examples of

typical /etc/bootptab entries include:

BRN_310107 1

and:

BRN_310107:ht=ethernet:ha=008077310107:\

ip=192.189.207.3:

Certain BOOTP host software implementations will not respond to

BOOTP requests if you have not included a download filename in the

configuration file; if this is the case, simply create a null file on the

host and specify the name of this file and its path in the configuration

file.

As with rarp, the Print / Fax server will load its IP address from the

BOOTP server when the printer is powered on.

DHCP mode

Dynamic Host Configuration Protocol (DHCP) is one of several

automated mechanisms for IP address allocation. If you have DHCP

Server in your network (typically a Unix, Windows

network) the Print / Fax server will automatically obtains its IP

address from DHCP server and register its name with any RFC 1001

and 1002-compliant dynamic name services.

If you do not want your Print / Fax server configured via

DHCP, BOOTP or RARP, you must set the Boot Method to

Static, this will prevent the Print / Fax server from trying to

obtain an IP address from any of these systems. To change

the Boot Method, you can use the control panel or the

BRAdmin application.

00:80:77:31:01:07 192.189.207.3

CONTROL PANEL SETUP 1 - 4

2000/XP