Fujitsu FI-5015C Aan de slag - Pagina 16

Blader online of download pdf Aan de slag voor {categorie_naam} Fujitsu FI-5015C. Fujitsu FI-5015C 24 pagina's. Image scanner
Ook voor Fujitsu FI-5015C: Aan de slag (26 pagina's), Brochure & specificaties (2 pagina's), Vervangings- en reinigingsinstructies voor verbruiksartikelen Vervangings- en reinigingsinstructies voor verbruiksartikelen (10 pagina's)

Pagina afdrukken

1) Connect the AC cable to the AC adapter.

2) Connect the AC adapter connector to the

scanner's DC inlet.

3) Plug the AC cable into the outlet.

The Function Number Display and the LED

HINT

may flash for an instant when plugging the

AC cable into the outlet.

2.3 Connecting the Scanner to

Your PC

Follow the procedure below to connect the USB cable.

1. Connect the USB interface cable to the USB

interface connector.

2. Connect the other end of the USB interface

cable to the PC.

•

Be sure to use the USB cable which

ATTENTION

comes as an accessory with this scan-

ner. Correct operation with commercially

available cables is not guaranteed.

•

When connecting to an USB hub, use

the first stage USB hub that is closest to

the computer. If you use the second or

later hub stages, the scanner may not

operate correctly.

•

If you connect the scanner with USB 2.0,

it is required that the USB port and Hub

are compliant with USB 2.0. The scan-

ning speed may slow down if it is con-

nected with USB1.1.

3. Press the "I" side of the main power switch to

turn on the scanner.

4. Press the power button to turn ON the scanner.

Your scanner will be automatically detected.

For Windows 2000:

When [Digital Signature not Found] appears,

click [Yes].

The installation of the scanner is completed.

2.4 Confirming Installation

To confirm whether the installation was successful, per-

form a scanning operation with an application that com-

plies with either the TWAIN regulations, such as

ScandAll PRO or the ISIS regulations such as Quick-

Scan Pro

■ Checking the Operation of the

Scanner Driver

1. Load the document on the scanner.

2. Launch ScandAll PRO.

From the [start] menu, select [All Programs] ->

[Fujitsu ScandAll PRO] -> [ScandAll PRO].

⇒

ScandAll PRO starts up.

3. In ScandAll PRO, select [Tool] on the menu,

and then select [Preferences].

⇒

The [Setup] dialog box appears.