Fujitsu fi-5530C - Document Scanner Aan de slag - Pagina 25

Blader online of download pdf Aan de slag voor {categorie_naam} Fujitsu fi-5530C - Document Scanner. Fujitsu fi-5530C - Document Scanner 28 pagina's. Color departmental scanner
Ook voor Fujitsu fi-5530C - Document Scanner: Handleiding voor installatieprocedures (7 pagina's), Handleiding voor installatieprocedures (9 pagina's), Installatieprocedures (3 pagina's), Aan de slag (28 pagina's), Brochure & specificaties (2 pagina's), Specificaties (2 pagina's), Instructies voor vervanging en reiniging van verbruiksartikelen (14 pagina's), Handleiding reinigingsinstructies (13 pagina's), Gebruiksaanwijzing (10 pagina's)

Pagina afdrukken
Fujitsu fi-5530C - Document Scanner Aan de slag

■ Temporary error

Indication
U1
A paper feed error occurred.
U2
A multi feed error occurred.
U6
The print cartridge is not set.
The following shows the procedure for releasing of each
temporary error.
• "U1" error
1. Remove jammed documents.
(Refer to fi-5530C Operator's Guide "5.1
Removing Jammed Documents" on the Setup
CD-ROM..)
2. Confirm that the documents meet the paper
conditions for scanning.
(Refer to fi-5530C Operator's Guide "6.2 Doc-
ument Quality" on the Setup CD-ROM.)
• "U2" error
Press the [Send to] button on the Operator Panel.
The papers that were multi fed will be ejected.
• "U6" error
This is a temporary error related with the
Imprinter option (sold separately). For details
refer to 553PR Operator's Guide, chapter "5
Error Message".
Meaning
fi-5530C Image Scanner Getting Started
■ Device alarm (Permanent error)
Indication
E2
Trouble in the optical system (front).
E3
Trouble in the optical system (back).
E4
The motor fuse has blown out.
E6
Trouble in the operator panel.
E7
Trouble occurred in the internal memory
(EEPROM).
E8
The SCSI interface fuse has blown out.
E9
An error in the image memory.
Ec
An alarm in the memory.
Ed
Trouble in the SCSI interface controller.
EF
A trouble in the Background switching
mechanism.
When you encounter any alarm, turn off and on the
scanner. If the alarm is still displayed on the Function
Number Display, contact the store where you purchased
the scanner or an authorized FUJITSU scanner service
provider.
Meaning
AP-3