Fujitsu fi-5650C Aan de slag handleiding - Pagina 22

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Fujitsu fi-5650C. Fujitsu fi-5650C 40 pagina's. Image scanner
Ook voor Fujitsu fi-5650C: Handleiding voor installatieprocedures (7 pagina's), Handleiding voor installatieprocedures (9 pagina's), Installatieprocedures (3 pagina's), Specificaties (2 pagina's), Brochure & specificaties (2 pagina's), Gebruiksaanwijzing (11 pagina's), Instructies voor vervanging en reiniging van verbruiksartikelen (19 pagina's), Reinigingsinstructies (2 pagina's), Reiniging en onderhoud (39 pagina's)

Pagina afdrukken
Fujitsu fi-5650C Aan de slag handleiding
4.
Click [INSTALL PRODUCTS].
5.
Click [TWAIN Driver] on the window
below.
6.
Error Recovery Guide Installation win-
dow appears.
Error Recovery Guide is a software that
displays troubleshooting information on
screen if any scanner error occurred.
Although you do not install this software,
the performance of the scanner would not
be affected. However it is recommendable
to install this software.
When you select [Yes] for installing Error
Recovery Guide, [Choose Setup
ATTENTION
Language] window appears. Select a
language and follow the instructions on
the window. Error Recovery Guide will
automatically start on finishing its
installation. Please wait until the
installation of TWAIN driver
automatically starts.
2-6
Select a language used for installa-
7.
tion on [Choose Setup Language]
window and click [OK].
8.
Install the application following the
instructions on the window.
When the [InstallShield Wizard Com-
9.
plete] window appears, click [Finish].
10.
Your computer is restarted and the
scanner will be detected.
Do not remove the Setup CD-ROM from
the CD drive until your PC will be
completely restarted.
Depending on the OS, the following
operations may be necessary.
ATTENTION
For Windows 98:
When a request for inserting the CD-
ROM of Windows 98 appears, insert it
into the CD drive and click the [OK]
button.
For Windows 2000:
When [Digital Signature not Found]
appears, click [Yes].
For Windows XP
When [Found New Hardware Wizard]
1.
appears, confirm that the Setup
CD-ROM is set in the CD drive, then
click the [Next] button.