Fujitsu fi-6800 Instructies voor vervanging en reiniging van verbruiksartikelen - Pagina 22

Blader online of download pdf Instructies voor vervanging en reiniging van verbruiksartikelen voor {categorie_naam} Fujitsu fi-6800. Fujitsu fi-6800 26 pagina's. Image scanner
Ook voor Fujitsu fi-6800: Specificaties (2 pagina's), Aan de slag handleiding (8 pagina's), Aan de slag handleiding (8 pagina's), Aan de slag handleiding (9 pagina's), Specificaties (4 pagina's), Handige bediening (24 pagina's), Aan de slag (6 pagina's)

Pagina afdrukken
Fujitsu fi-6800 Instructies voor vervanging en reiniging van verbruiksartikelen
fi-6800 C
R
ONSUMABLE
EPLACEMENT AND
22
C
I
LEANING
NSTRUCTIONS
C
G
A
LEANING THE
LASS
REAS
•
Clean the Glass Areas on the lower side of the ADF with a lint free
cloth.
Removable Glass
Non-Removable Glass
Note:
Under normal conditions the Removable Glass assembly should not
have to be removed. If there is a large amount of paper dust in the
scanner and the scanned images continue to have vertical streaks,
follow the directions below to clean behind the glass.
•
Loosen the screw on the Glass
Assembly. This is a captive
screw so it will not come free.
•
Tilt the Glass to the angle shown
on the right.
•
Remove the Glass as you slide it
to the left.
•
Clean the backside of the glass
you removed with a lint free
cloth.
•
Using a cotton swab, clean the
glass inside the area where the
Glass was removed.
•
Reinstall the Glass Assembly.
•
Reset the Cleaning Counter in the Software Operation Panel or on the
Scanner Operator Panel.
(
.)
CONT
Glass