Fujitsu fi-7300NX Instructies voor vervanging en reiniging van verbruiksartikelen - Pagina 14
Blader online of download pdf Instructies voor vervanging en reiniging van verbruiksartikelen voor {categorie_naam} Fujitsu fi-7300NX. Fujitsu fi-7300NX 27 pagina's. Image scanner
Ook voor Fujitsu fi-7300NX: Aan de slag (2 pagina's)
Pagina afdrukken
Note that the suggested replacement cycles are guidelines for using A4 (80 g/m
paper, as these cycles vary depending on the type of documents scanned and how often the scanner is used and
cleaned.
HINT
Only use the specified consumables.
For information on purchasing the consumables, contact the distributor/dealer where you purchased this product. Or,
make an inquiry by referring to the contact information at the Contact for Inquiries section in Safety Precautions
bundled with this product.
Replacing the Brake Roller
Replace the brake roller in following procedure.
1.
Turn off the scanner, unplug the power cable and wait for at least 15 minutes.
2.
Remove all documents From the ADF paper chute (feeder).
3.
Open the ADF.
When the ADF is open, it might close accidentally. Be careful not to get your fingers caught.
4.
Remove the brake roller.
a.
Hold both ends of the cover, and open it in the direction of the arrow.
2
[20 lb.]) wood-free or wood-containing