Fujitsu M3092 Series Instructies voor vervanging en reiniging van verbruiksartikelen - Pagina 9
Blader online of download pdf Instructies voor vervanging en reiniging van verbruiksartikelen voor {categorie_naam} Fujitsu M3092 Series. Fujitsu M3092 Series 13 pagina's.
Pagina afdrukken
C
R
LEANING THE
OLLERS WITH THE
The cleaning papers are designed to remove only loose paper dust and ink
from the rollers. Use the cleaning paper approximately every 1,000 sheets
scanned. They are to be used in between the thorough cleanings of the
scanner. Using the cleaning paper does not take the place of the
more complete cleanings described later in this section
•
Set the Hopper Guides to
the widest width possible.
•
Spray the Cleaning Paper lightly with F1 Cleaner and place the Cleaning
paper against the right edge of the Hopper Guide. Press the SCAN button
on the front of the scanner to scan the cleaning paper. Do Not Save
These Images. This operation is used only to pass the cleaning paper
through the paper feed path. Check the path to see if it needs further
cleaning, if you find debris in the paper path perform this cleaning or the
(C
ADF
LEANING THE
•
Place the Cleaning Paper against the Left Hopper Guide and perform the
previous step.
fi-4110CU/M3091/M3092 S
C
P
LEANING
APER
Hopper Guides
Open
L
-F
C
WITH
INT
REE
LOTHS
C
R
ERIES
ONSUMABLE
EPLACEMENT AND
Lint Free
Cloth
F1 Cleaner or
neutral detergent
No Paint Thinner
)
in the following steps.
C
I
LEANING
NSTRUCTIONS
9