Brother Business Smart MFC-J4510dw Snelstarthandleiding - Pagina 27

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Brother Business Smart MFC-J4510dw. Brother Business Smart MFC-J4510dw 29 pagina's. Quick setup guide - spanish
Ook voor Brother Business Smart MFC-J4510dw: Handmatig (36 pagina's), Handmatig (22 pagina's), Handleiding productveiligheid (17 pagina's), Handmatig (13 pagina's), Handmatig (22 pagina's), Handleiding voor snelle installatie (47 pagina's), Handmatig (18 pagina's), Handleiding voor snelle installatie (47 pagina's), Brochure & specificaties (4 pagina's), Handleiding productveiligheid (20 pagina's), Specificaties (2 pagina's), Handleiding voor snelle installatie (47 pagina's), Handleiding productveiligheid (25 pagina's), (Spaans) Handleiding voor Web Connect (38 pagina's), (Spaans) Handboek (24 pagina's), (Engels) Handleiding voor productveiligheid (16 pagina's), (Spaans) Handboek (11 pagina's), (Engels) Snelle configuratiegids (47 pagina's)

For Network Users

To restore all network settings of the internal Print/Scan server to the factory default, please follow the steps below.

Make sure the machine is not operating, then disconnect all the cables from the machine (except the power

cord).

Press

Press All Settings.

Press Network.

Swipe up or down, or press a or b to display Network Reset, and then press Network Reset.

Press Yes.

Hold down Yes for 2 seconds to confirm.

The machine will restart, re-connect the cables once this is complete.

Press

to cycle between lower case and upper case.

Press

to cycle between letters, numbers and special characters. (The characters available may differ

depending on your country.)

To move the cursor to the left or right, press d or c.

Inserting spaces

To enter a space, press Space.

Making corrections

If you entered a number or a character incorrectly and want to change it, move the cursor to the incorrect one.

Press

and then re-enter the correct one. You can also go back and insert a character.