Fujitsu PA03541-B005 - ScanSnap S300 Aan de slag handleiding - Pagina 14
Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Fujitsu PA03541-B005 - ScanSnap S300. Fujitsu PA03541-B005 - ScanSnap S300 37 pagina's. Color image scanner
Ook voor Fujitsu PA03541-B005 - ScanSnap S300: Specificatie (2 pagina's)
Pagina afdrukken
■ Rear View
Adhesive label
Reminds you that the supplied
software has to be installed first.
After installing ScanSnap Manager
onto your computer, remove this
label to connect the scanner to the
PC.
ATTENTION
13
For the Document Specification, refer to "3.2 Paper Sizes of
Documents to be Scanned" in "ScanSnap S300 Operator's Guide"
stored in the ScanSnap Setup CD-ROM.
The scanner is turned on/off in conjunction with the connected personal
computer, or with opening/closing of the paper chute. Ordinary, you can
forget about turning on/off the ScanSnap.
USB connector
Connect a USB cable here.
Power connector
Connect either the Power cable or
USB bus power cable.
Security cable slot
You can plug a commercially available
security cable into this slot (anti-theft).