Fujitsu ScanSnap iX500 Handleiding Wi-Fi-verbinding - Pagina 27

Blader online of download pdf Handleiding Wi-Fi-verbinding voor {categorie_naam} Fujitsu ScanSnap iX500. Fujitsu ScanSnap iX500 41 pagina's. Windows
Ook voor Fujitsu ScanSnap iX500: Aan de slag handleiding (17 pagina's), Aan de slag handleiding (16 pagina's), Handleiding voor snelle installatie (3 pagina's), Aan de slag (18 pagina's), Veiligheidsmaatregelen (11 pagina's), Handmatig (2 pagina's), Snelstarthandleiding (2 pagina's)

Switching the Computer that Is to Be Connected to the ScanSnap

ATTENTION

l ScanSnap Manager can be installed on multiple computers, for example, a home computer and an

office computer, when used by one user.

l If you switch the computer that is to be connected to the ScanSnap via wireless LAN, you cannot

connect computers that were used before you switched the computer.

Preparation

Connect the computer to a wireless access point that is to be used when connecting the computer

to the ScanSnap.

For a successful connection, the following information of the wireless access point is required:

l Network name (SSID)

l Security key (password)

In the window shown below, you can check or change the network the computer is connected to:

Connection Method

This method assumes that ScanSnap Manager is not installed on the computer that is to be

connected to the ScanSnap. Install ScanSnap Manager from the Setup DVD-ROM and follow the

Wireless Network Setup Wizard that appears after the installation is complete.

Network Connection