Brother HL-2170W Handleiding voor snelle installatie - Pagina 3
Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother HL-2170W. Brother HL-2170W 12 pagina's. Brother printer
Ook voor Brother HL-2170W: Specificatieblad (2 pagina's), Brochure & specificaties (4 pagina's), Servicehandleiding (8 pagina's)
Pagina afdrukken
Getting Started
Carton Components
1. Face-down output tray support flap 1
2. Control panel
3. Manual feed paper guide
4. Manual feed slot
5. Manual feed slot cover
6. Paper tray
7. Front cover
8. Power switch
9. Ventilation hole
10. Face-down output tray
The interface cable is not a standard accessory. Buy the appropriate cable for the
interface you are going to use.
USB cable
Please make sure you use a USB 2.0 interface cable that is no longer than 6
feet (2 meters).
Your printer has a USB interface that is compatible with the USB 2.0
specification. This interface is also compatible with Hi-Speed USB 2.0;
however, maximum data transfer rate will be 12 Mbits/s. The printer can
also be connected to a computer that has a USB 1.1 interface.
DO NOT connect the interface cable at this time. Connecting the interface
cable is done during the printer driver installation process.
When you use a USB cable, make sure you connect it to the USB port of
your computer and not to a USB port on a keyboard or non-powered USB
hub.
Network cable
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
2