Brother HL-2270DW Handleiding voor snelle installatie - Pagina 25

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother HL-2270DW. Brother HL-2270DW 36 pagina's. How do i configure the wireless printer using wi-fi protected setup or aoss and install the printer driver in windows?
Ook voor Brother HL-2270DW: Gebruikershandleiding voor netwerken (47 pagina's), Handleiding voor snelle installatie (36 pagina's), Installatiehandleiding (5 pagina's), Handleiding voor snelle installatie (35 pagina's), Faq en probleemoplossing (6 pagina's)

Wireless Network

Choose Temporarily use a Ethernet (LAN)

cable and then click Next.

Remove the protective cap from the LAN

connector.

Temporarily connect the Brother wireless

device to your access point using a network

cable (not included) and click Next.

Choose the machine you wish to configure,

and click Next. If the list is blank, check if the

access point and the machine are powered on,

and then click Refresh.

Note

• The default node name is "BRNxxxxxxxxxxxx".

• You can find your machine's MAC Address

(Ethernet Address) by printing out the Printer

Settings Page. See Print the Printer Settings

Page on page 31.

The wizard will search for wireless networks

available from your machine. Choose the

access point you wish to associate the

machine with, and then click Next.

Note

• If the list is blank, check that the access point

has power and is broadcasting the SSID, and

then see if the machine and the access point

are within range for wireless communication.

Then, click Refresh.

• If your access point is set to not broadcast the

SSID you can manually add it by clicking the

Advanced button. Follow the on-screen

instructions for entering the Name (SSID), and

then click Next.

Macintosh