Brother HL-3075CW Handleiding voor snelle installatie - Pagina 26

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother HL-3075CW. Brother HL-3075CW 45 pagina's. Digital color printer
Ook voor Brother HL-3075CW: Handleiding voor snelle installatie (29 pagina's), Technische specificaties (2 pagina's)

Pagina afdrukken

Wireless Network

Note

• If the list is blank, check that the access point

has power and is broadcasting the SSID, and

then see if the machine and the access point

are within range for wireless communication.

Then, click Refresh.

• If your access point is set to not broadcast the

SSID you can manually add it by clicking the

Advanced button. Follow the on-screen

instructions for entering the Name (SSID), and

then click Next.

If your network is not configured for

Authentication and Encryption, the following

screen will appear. To continue configuration,

click OK and go to j.

Enter the Network Key you wrote down in

step 9 on page 21 and then enter the key again

in Confirm Network Key, then click Next.

Click Next. The settings will be sent to your

machine.

Note

• The settings will remain unchanged if you click

Cancel.

• If you want to manually enter the IP address

settings of your machine, click Change IP

Address and enter the necessary IP address

settings for your network.

• If the wireless setup failure screen appears,

click Retry.

Disconnect the USB cable between the

computer and the machine.

Click Next to continue to install the printer

driver.

Wireless setup is now complete. A four

level indicator at the right of your

machine's LCD will show the wireless

signal strength of your access

point/router.

To install the printer driver, continue to

step 13-d on page 30.

Now go to

page 30

Macintosh