Brother HL-4040CN Servicehandleiding - Pagina 9

Blader online of download pdf Servicehandleiding voor {categorie_naam} Brother HL-4040CN. Brother HL-4040CN 13 pagina's. Brother printer - laser printer user manual
Ook voor Brother HL-4040CN: Brochure (4 pagina's), Handleiding voor snelle installatie (35 pagina's), Brochure & specificaties (2 pagina's), Referentielijst onderdelen (40 pagina's), Handleiding voor service-updates (11 pagina's), Reiniging en onderhoud (7 pagina's), Technische instructies (6 pagina's), (Deense) Gebruikershandleiding (35 pagina's)

CHAPTER 1 TROUBLESHOOTING

INTRODUCTION

Troubleshooting is the countermeasure procedures that the service personnel should follow if

an error or malfunction occurs with the machine. It is impossible to anticipate all of the possible

troubles which may occur in future and determine the troubleshooting procedures, so this

chapter covers some sample troubles. However, those samples will help the service personnel

pinpoint and repair other defective elements.

1.1

Precautions

Be sure to observe and follow all the precautions to prevent any secondary problems from

happening during troubleshooting.

(1) Always turn off the power and unplug the power cable before removing any covers or

PCBs, adjusting the machine and so on. If you need to take voltage measurements with

the power switched on, take the greatest of care not to receive an electric shock.

(2) When connecting or disconnecting cable connectors, make sure that you hold the

connector body and not the cables.

(3) Electronic devices are sensitive to static build up; make sure that you touch a metal

portion of the machine to discharge yourself before accessing the PCBs.

Handle PCBs with care when repairing them.

Verify again that the repaired portion works properly.

1.2

Check the following items before attempting to repair the machine.

(1) Put your machine on a flat, stable surface such as a desk that is free of vibration and

shocks.

(2) Use the machine in a well-ventilated room; use the machine within the following ranges of

temperature and humidity: temperature between 10°C and 32.5°C (50 °F to 90.5 °F), and

the relative humidity is maintained between 20% and 80%.

(3) Ensure the machine is not exposed to direct sunlight, excessive heat, moisture, or dust.

(4) Keep the machine horizontal when you carry it. To prevent injuries when moving or lifting

this machine, make sure to use at least two people.

Fig. 1-1

1-1