AEG LTR8ULM Gebruikershandleiding - Pagina 20
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG LTR8ULM. AEG LTR8ULM 40 pagina's.
Pagina afdrukken9.11 Startuitstel
With this option you can delay the start of a
programme in a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases by steps
of 30 minutes up to 90' and from 2 hours up
to 20 h.
After touching the Start/Pauze button, the
display shows the indicator
10. SETTINGS
10.1 Acoustic signals
To deactivate the acoustic signals when the
programme is completed touch the Anti-
allergie and the Extra Spoelen buttons
simultaneously for about 3 seconds.
The acoustic signals, they continue
operate when the appliance has a
malfunction.
10.2 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option, touch
the Vlekken/Voorwas and the Extra
Spoelen buttons simultaneously until the
indicator
comes on/goes off on the
display.
You can activate this option:
• After you touch the Start/Pauze button: all
the buttons and the programme dial are
deactivated (except Aan/Uit button ).
• Before you touch the Start/Pauze button:
the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
10.3 Soft Plus
Set the Soft Plus option to optimise the fabric
softener distribution and improve the fabric
softness.
It is suggested when you use the fabric
softener.
20
ENGLISH
selected delay time and the appliance begins
the countdown.
9.12 Start/Pauze
Touch the Start/Pauze button to start, pause
the appliance or interrupt a running
programme.
and the
This option increases slightly the
programme duration.
To activate/deactivate this option touch the
Temperatuur button and the Centrifugeren
button simultaneously until the
comes on/goes off above the
10.4 Permanent Extra Rinse
With this option you can permanently have an
extra rinse when you set a programme where
it is selectable.
• To activate/deactivate this option touch
10.5 Operating Hours Counter
It is possible to visualise the total operating
time of the appliance in hours, starting from
the first switching on. This value will count
operating time of the cycles (does not include
pauses, delayed start time). To visualise this
value, proceed as follows:
1. Switch the appliance on by pressing
2. Turn the programme knob to the Eco
3. Press and hold the Anti-allergie and Extra
the Extra Spoelen button and the Extra
button simultaneously the relevant
indicator comes on/goes off.
This option adds two rinses and the
display shows
.
Aan/Uit button.
40-60 programme (1st position
clockwise).
Spoelen buttons for some seconds (within
10 seconds after the switching on. After
indicator
indicator.